Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
21st August 2016, 07:20 PM #1
Garage door- tapered or not (acceptable gap)?
Hi
I am replacing a garage roller door and pedestrian door combo with a full-width roller door.
The problem is there is a slight slope on the garage floor, that is more pronounced across the new, greater width. Also, a dip in the concrete floor in the centre of the door.
Here are the options:
1. Taper the bottom of the roller door. There will still be a 10mm gap in the middle (even with the rubber bottom seal) but each end will touch the ground, or
2. Don't taper the bottom. The right hand side will touch the ground, but there will be a 17mm gap on the left (even with the rubber bottom seal)
I need to decide if it's worth the extra $200 for a tapered door (given that neither option is perfect).
Interested in your feedback.
Attached Images
- image.jpeg (244.9 KB)
- image.jpeg (238.1 KB)
- image.jpeg (223.0 KB)
Read and reply to the full thread at RenovateForum.com....
-
21st August 2016 07:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Adding door to garage tilt door
By Glenn.Visca in forum THE SHEDReplies: 20Last Post: 10th July 2014, 09:07 AM -
Help for Gliderol Garage Door (panel door)
By apple0604 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 13Last Post: 31st August 2012, 03:14 PM