Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2008
    Location
    Victoria Australia
    Posts
    5,897

    Arrow Prepping architrave and skirting for paint.

    Hey guys, so all my skirting and arcs (primed mdf with two coats of paint already ) have been shot to the wall. Wondering if i just use a multi purpose filler to fill the nail holes and then sand back it'll be all good for painting? After caulking as well of course.

    Anything else I should know?

    Cheers


    Read and reply to the full thread at RenovateForum.com....

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2016
    Location
    Mooroopna, Victoria, Australia
    Age
    33
    Posts
    228

    Default

    Sounds like a good plan to me. The only other thing I'd check is if it's oil or water based paint on there already as water based doesn't apply well to oil based.

  4. #3
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    69
    Posts
    2,065

    Default

    Some of those fillers dry to a VERY hard material which is very hard to sand back flush with the surface. I like to use a damp rag to "flatten" the filler after the hole is filled then when dry run around with sand paper and block to be sure the surface is flat.
    If you are up to the skirts and arcs and paint the job is nearly finished
    Just do it!

    Kind regards Rod

  5. #4
    Join Date
    Jun 2003
    Location
    ...
    Posts
    7,955

    Default

    Did no one read this part of the original post?

    Read and reply to the full thread at RenovateForum.com....
    This post is for info, the original poster would never see your sage advice as he/she may not be a member here.

Similar Threads

  1. 11mm architrave to 18mm skirting
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 26th June 2014, 05:00 PM
  2. 1.6mm or 2mm nails for Skirting and Architrave?
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 18th February 2013, 12:20 PM
  3. Anyone know how to make architrave/skirting
    By benurbanescapes in forum WOODWORK - GENERAL
    Replies: 22
    Last Post: 6th August 2010, 03:10 AM
  4. skirting and architrave supplier
    By WillyInBris in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 3
    Last Post: 19th February 2008, 10:54 PM
  5. Skirting/Architrave questions
    By gregt in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 6
    Last Post: 13th July 2007, 09:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •