Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Box lock recommendations needed
-
23rd December 2022, 02:47 PM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Box lock recommendations needed
Can anyone please suggest a suitable box lock to fit 10mm thick jewellery box timber. Preferably one that is relatively easy to fit
regards,
Dengy
-
23rd December 2022 02:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th December 2022, 04:51 PM #2Woodie.
- Join Date
- Dec 2006
- Location
- Cudgen NSW
- Posts
- 103
Box Locks
10mm is very hard most full mortice locks need 6mm mortice for the guts & 8mm for the top, Mic Moggy at Veneer inlay Australia no longer stocks the good 1/2 mortice locks but he assured me he will soon be stocking a new type of 1/2 mortice that doesn't fall apart I'd try his online shop or send him a message. Here in Australia getting good hardware is getting hard The USA has Rockler etc with all good hardware reasonably priced but the postage is very prohibitive. i recently saw a box on Etsy from Morocco for $55 us with a Viola 1/2 mortice lock in it, the seller won't ship to Australia.
Adrienne K 7.jpg This Red Cedar box has wall at 12mm just under 1/2 inch full mortice Viola lock.
Cheers[/SIGPIC]Pigs a#@*.
-
25th December 2022, 06:17 PM #3
Buy Mortice Lock Set - Small in Australia - CMI Hermle
these viola locks are here
44 bucks though
-
25th December 2022, 08:34 PM #4
Similar Threads
-
Jig needed for lock mitre router bit operation
By Dengue in forum ROUTER JIGSReplies: 10Last Post: 9th May 2014, 07:14 PM -
Setup instructions for Lock Mitre bit needed
By Dengue in forum ROUTING FORUMReplies: 3Last Post: 2nd February 2011, 08:25 PM -
recommendations needed
By fraggles in forum WOODTURNING - GENERALReplies: 15Last Post: 22nd August 2007, 01:26 PM