Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: box locks
-
3rd March 2011, 08:10 PM #1New Member
- Join Date
- Apr 2008
- Location
- Taree
- Posts
- 8
box locks
i am making a sliding lid box of 12.6 mm New Guinea Rosewood. I need to be able to lock the sliding lid. where can I buy a good quality full mortise lock that will fit in the timber wall or should I get a half mortise lock fitted on the inside?
many thanks
-
3rd March 2011 08:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd March 2011, 10:20 PM #2
Box locks - you could try Box Maker's Brasswear
Have you had any luck finding small locks at your local hardware store or bunnies?
Do you need the lid to lock to stop unwanted access, or do you want the lid to 'lock' as in held in place? If it's to be held in place, could you use magnets?
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
3rd March 2011, 10:47 PM #3New Member
- Join Date
- Apr 2008
- Location
- Taree
- Posts
- 8
box locks
thank you for your reply.
the need for the lock is to stop unwanted access. (mainly from little children around the place). I have not yet found a lock with the suitable dimensions and quality for this size timber except a half mortise lock from "Original Marquetry", England or Horton Brasses, USA and Whitechappel, USA.
Nick
-
4th March 2011, 09:39 AM #4
Try Watson Brass Fittings, Reproduction Antique Cabinet Hardware
cheers
SteveDiscover your Passion and Patience follows.
www.fineboxes.com.au
-
4th March 2011, 09:57 AM #5
Snap - that's what I was looking for. thanks Steve
dykshoorn - take a look at the box lock, could be just what you needBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
5th March 2011, 03:02 PM #6SENIOR MEMBER
- Join Date
- Nov 2008
- Location
- Perth
- Posts
- 544
box locks
don't forget Australian made locks from:
Jacksons Lock Manufacturing - Home
Similar Threads
-
Where to buy cam locks??
By trenyboy in forum WOODWORK - GENERALReplies: 3Last Post: 26th January 2009, 02:01 PM -
Box Locks
By Garell in forum WOODWORK - GENERALReplies: 8Last Post: 9th March 2007, 07:51 AM -
Cam-locks
By Iwan in forum WOODWORK - GENERALReplies: 7Last Post: 26th June 2006, 10:44 AM -
cam-locks
By Iwan in forum Links to: TIMBER & HARDWARE SUPPPLIERSReplies: 1Last Post: 20th June 2006, 11:41 PM -
locks
By Tom Dinning in forum WOODWORK - GENERALReplies: 3Last Post: 27th October 2000, 09:03 PM