Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: compound bow carry case/box
-
9th July 2010, 12:46 PM #1Intermediate Member
- Join Date
- Mar 2007
- Location
- Esperance
- Posts
- 30
compound bow carry case/box
Good Morning All,
I would like to make a timber carry case for my sons compound bow now i understand that sizes can vary dramatically but if someone has some plans pictures that i can use as a guide it would be much appreciated the box hopefully will be made from Australian jarrah and just sanded and clearcoated hopefully using an automotive clearcoat and hardener but lets just see if i can get to the point of having a box that is the right size and square hmm should be interesting only using handtools as this jarrah is 40mm wide and 12mm thick even i should be able to cut a straight line using that.
Ok will hand it over to those who know
Regards
Neil R Stoker
P.S. i can supply photos and measurements if needed
-
9th July 2010 12:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
New Bar Carry Box
By dai sensei in forum SMALL TIMBER MILLINGReplies: 4Last Post: 24th April 2008, 10:33 PM -
Glockenspiel carry case.
By Sculptured Box in forum BOX MAKINGReplies: 7Last Post: 11th February 2008, 01:34 PM -
SYMTEC LATHES (a carry over)
By RETIRED in forum WOODTURNING - GENERALReplies: 4Last Post: 6th October 1999, 12:54 PM