Needs Pictures: 0
Results 1 to 11 of 11
Thread: Some Inlay/Banding Strips
-
7th June 2019, 07:00 PM #1GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,188
Some Inlay/Banding Strips
I haven't done much of inlaying/banding strips and what I have done I've made myself. But, whilst at the Maleny Wood Expo last month and talking to the owner of where a lot of you guys (and myself) buy your strap hinges from, Michael. He had a box of these selling them in packs for $18 a pack or 3 packs for $50. Michael told me he usually sold each pack for $140. So I bought 3 packs. This was on the Saturday, on the Monday they were all gone.
So after I got home I decided to make 3 identical boxes so I could experiment with the 3 different patterns. The boxes are made from Australian Red Cedar and White Cedar. 250mm x 150mm.
Here are a few pics to show you how the banding turned out. Brian, a close up pic of my "scalloped" piece for the ring holders.
Paul
-
7th June 2019 07:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th June 2019, 07:48 PM #2SENIOR MEMBER
- Join Date
- Jan 2010
- Location
- Auckland New Zealand
- Posts
- 312
Lovely boxes Paul. I like the wide banding.
Where do you buy the strap hinges and clasps from?
Cheers
Jacques
-
7th June 2019, 08:37 PM #3
Sounds like you got a real bargain with that banding haul and already started to put it to good use.
Dallas
-
7th June 2019, 08:59 PM #4Novice
- Join Date
- May 2017
- Location
- New Zeaand
- Posts
- 11
RuRu
Thanks so much for posting the photos of the boxes you made and including the description of the woods you used.
As a beginner woodworker, I read most of the posts in the Box Making forum. I get the most benefit when the poster has taken the time to describe how and what the box is made of.
Would you please advise where you purchased the hardware from, because I would like to purchase from that same person, if he/she sells to the public. I feel that the cost is likely to be less than purchasing from the UK!
Also, would you mind advising what grits you went through and what you used to finish the wood?
I really appreciate you reading this email and hopefully answering it, if you have time.
Cheers
Ruru
-
7th June 2019, 10:25 PM #5GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Hi Paul,
Thanks for the close-up of the scalloped piece! Looks like your catches and hinges came from the same source as the banding?
I wish there was someone who supplied box catches and hinges at a quality and price point somewhere between the high end - Ian Hawthorne/Andrew Crawford/Brusso and the low end stuff available locally. Anton Gerner has some hinges, but not rail hinges or stop hinges. Will have to keep looking!
Thanks again,
Brian
-
7th June 2019, 11:09 PM #6GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,188
Hi there Gents, firstly the strap hinges and the clasp and the banding were bought from
https://www.veneerinlay.com.au/
I'd never used those clasps before but seeing as I met Michael on that day I bought 5 from him ($10 each). Plus the inlay/banding. The strap hinges I already had about a 15 or so at home so didn't buy any more at that time.
I use those hinges on all boxes about that size 250mm x 150mm and have the sides 10mm. 12mm sides I would reserve for larger boxes and most likely would use the Smart Hinge from the UK.
For that particular inlay banding I routered into what was to become lid frame timber down 1mm. (before doing the mitre joints). The inlay is only 1/2mm thick. I glued the banding into that router slot. Allowing for a bit of excess banding to be wasted when cutting the mitres. (make sure you chalk mark the insides of your frame). I do my mitre cuts on my table saw and if they are pretty accurate you should end up with neat mitres and banding. After gluing/clamping of your mitre frame and lid insert, I put it through my home made drum sander and I have 1/2mm to play with before I hit the actual banding. Giving me nice clean joints.
By now your nearly ready to glue and clamp the lid onto the main box carcass. After this I sand with Random Orbital sander 240, 320, 400, 800, 1500 and 2000 grit. Still got a bit to do yet, slice off lid etc, but your well on your way.
For finishing I have been experimenting with a few different mixes but basically its oil and wax.
Paul
-
8th June 2019, 01:13 AM #7SENIOR MEMBER
- Join Date
- Jan 2010
- Location
- Auckland New Zealand
- Posts
- 312
-
8th June 2019, 09:31 AM #8GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,188
Yes botes, your right there. Those clasps are quite nice for ten bucks though. I've never seen any in solid brass yet. Out of the five I bought I used another on a watch box that is finished but still playing around with the lining.
Paul
-
8th June 2019, 10:15 AM #9GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Paul/Jacques,
That style of latch is available in solid brass from Jim Carrol. Not sure about the finish, though. It looks like a “brushed” finish in one pic.
See bottom of the page:
https://www.cwsonline.com.au/shop/ca...-locks-catches
Note there are two sizes of the solid brass version. There are also chrome versions.
Brian
-
8th June 2019, 10:41 AM #10GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,188
Hi Brian, Nice pick up there, I looked all through that site during the week and didnt notice those. I placed an order with Jim during the week, wish now I would have got one of those to see what they are like. Sometimes photos do not do justice to the actual product. I want to phone him about something else on his site, might have to check those out also.
Paul
-
8th June 2019, 06:54 PM #11
Looks like the smaller of those catches is only brushed finish but the larger one appears to be polished.
Similar Threads
-
Inlay Banding
By Mobyturns in forum WOODWORK - GENERALReplies: 0Last Post: 23rd January 2018, 12:44 AM -
How to make inlay banding fit?
By Dengue in forum BOX MAKINGReplies: 14Last Post: 2nd August 2015, 08:12 PM -
inlay/banding
By ninpoman in forum WOODWORK - GENERALReplies: 1Last Post: 23rd November 2013, 09:10 AM -
Walnut box with banding inlay
By ajw in forum BOX MAKINGReplies: 6Last Post: 26th December 2011, 04:08 PM -
Inlay Banding
By Termite in forum WOODWORK - GENERALReplies: 11Last Post: 6th December 2004, 09:05 PM