Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Miniature Piano Hinge
-
19th July 2017, 09:58 PM #1GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,190
Miniature Piano Hinge
Hi gang, I've been following this box section for about 4 or 5 years now and haven't noticed any boxes done with a piano hinge. Or maybe I missed them. So recently I decided to buy 3 of these and see how they go. When you buy them they are 300mm in length, so need to be cut down to whatever you want.
These ones open up to in excess of 180 degrees, so some sort of a stop is needed. So I made up 3 identical boxes and this also gave me a chance to experiment with my new inlay kit.
I probably wont buy any more of these hinges, they are rather fiddly but I think the final result is rather neat.
Paul
-
19th July 2017 09:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th July 2017, 10:14 PM #2GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,190
Oops I forgot to add. The main timber used here is White Cedar. I have a stack of this, probably enough to make 100 of these boxes. Long story how I come by it, all for free.
Lovely timber to work with really. The more you sand it, it gets that lovely honey/gold look about it. And even a little bit of fiddle back creeps into it.
Paul
-
21st July 2017, 10:55 PM #3Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 274
Nice result, they look good. Why would you not use the hinge again? Also where did you source the hinge.
I like the look of the hinge, compliments the design
-
22nd July 2017, 06:42 PM #4GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,190
Hey there Dinosour,
I am pretty sure I bought them from Timbecon. About $11.50 each I think. I'll see how these boxes go if they sell. They were rather fiddly installing. Getting your distance from each end equal and then cutting the hinge and putting a curve on it to match the router cut. The stop block at the back works very good also.
Just that in comparison to those strap hinges that were mentioned in another thread, these piano hinges take much longer to install.
Paul
-
23rd August 2017, 05:31 AM #5Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 274
Sorry for delayed response Paul, but thanks for answering the question.
Not sure if it's appropriate to ask but have you sold any ?
-
27th August 2017, 02:30 PM #6GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,190
Hi Dinosour,
Yes the one with the heart has been sold for $140. I'll rethink on these hinges. I also bought a small piano hinge with a fixed opening of about 100 degrees. It's a lot more solid than these ones, I think it is 200mm in length. I must get around to using it to see how it goes. Got a few other ideas I am fiddling with at present, and also in the middle of another guitar build.
Paul
Similar Threads
-
Small piano hinge
By Dazm in forum BOX MAKINGReplies: 11Last Post: 27th January 2017, 03:59 PM -
Compound cupboard door hinge with pivot hinge mounting
By Gestalt in forum WOODWORK - GENERALReplies: 45Last Post: 28th August 2016, 08:45 PM -
Piano hinge?
By shanesmith80 in forum WOODWORK - GENERALReplies: 2Last Post: 29th August 2015, 04:50 PM -
Smart Hinge or Neat Hinge alternatives?
By Evanism in forum BOX MAKINGReplies: 3Last Post: 25th April 2015, 09:41 AM -
Continuous brass piano hinge
By lesterz in forum BOX MAKINGReplies: 5Last Post: 20th January 2012, 09:23 PM