Needs Pictures: 0
Results 1 to 14 of 14
Thread: Mother's letter box
-
29th April 2019, 11:14 AM #1
Mother's letter box
Here's a box I made for my mother's birthday to hold letters and her writing stationary. It held a lot of firsts for me, so whilst a challenge, it was a great learning experience and has given me some new skills to add to my quiver namely:
- Cutting and book matching the lid.
- Inset lid.
- Long hinges (rather than normal small door style hinges).
- French polishing, steel wool and wax.
- Flattening the matching edges of the box and lid with a hand plane by "planeing in a circle".
I gave it to her last night and she was very pleased, so I am too.
The box has Tas Oak sides, with a book matched piece of Black heart Sassafras inset (5ish mm) for the lid and blackwood (I think) splines. The base is sealed 6 mm MDF board.
The finish was a real challenge. Up till this box, the only finishes I've every used where polyurethane or wax. I did this with poly too, but the timber features simply didn't pop. After trying a range of options, and having to sand back after every failed attempt, I decided to follow a single, well documented process and ordered Neil's Polisher's Handbook, with a bottle of U-Beaut Hard Shellac. I dutifully followed the directions for French polishing. Whilst perhaps not a professional finish, and it took me a looooong time, it is by far the best finish I have every produced on a project. It is also the first time I have used 0000 steal wool. All I can say is WOW. It transformed a beautiful finish into something spectacular. After a final coat of wax, I couldn't stop touching it. It is such a sensual feel. Glassy but also silky. It may be hard to see, bit the third last photo has a close up of some of the grain. It can best be described as the type of rock we used to call "tiger's eye", where you can really look right into it, and the grain shifts beautifully as you move your vantage point. The other point of interest, I've used lots of Tas Oak, but am quite enamoured with what this finish did to it. Again, incredible depth!
Note that the marking gauge in the pictures is simply for scale. It's new for me, was wasn't ready to give it away just yet!
Lance
20190428_164355.jpg20190428_164919.jpg20190428_164538.jpg20190428_164420.jpg20190428_164838.jpg20190428_164813.jpg
-
29th April 2019 11:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2019, 11:28 AM #2SENIOR MEMBER
- Join Date
- Jan 2010
- Location
- Auckland New Zealand
- Posts
- 312
I reckon it turned out pretty well. You can be proud of your work and if your mom lives it then its a job well done.
Where did you source the hinges and clasp from and what's your feedback on them?
Cheers
Jacques
-
29th April 2019, 12:08 PM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,037
Nice job. It's one thing to be able to make a nice box, but it's really the finish that brings it to life. As you say, you just can't stop touching it! I've only ever seen those hinges inset from the box sides, placing them as you have on the outside edge would never have occurred to me. You should have lined the bottom, it would have brought an extra level of WOW when you opened the box.
Sounds like you've got a new favourite finish.
-
29th April 2019, 01:16 PM #4GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 2,343
Looks great Lance.
-
29th April 2019, 01:25 PM #5
I got them from McJing, the 95 deg strap hinges at https://mcjing.com.au/categorybrowse...categoryid=138.
As for my feedback, hmmmm, there's a reason they cost $3, and the ones a bit up the page cost $20 a set. Of the three sets I ordered, three or four hinges are bent, so would need to be straightened, but expect they would just break instead. Plus the finish is a little rough and the plating thin (on one the plating wore through from the steel wool). But again, $3 per set.
Hinges on the edge... . The intention was to inset them from the edge, but when it came to actually do it, I realised I never had a chisel thin enough (or is there another method I'm not aware of?). So this was my solution, and actually adds a bit of interest to the sides I think. If only I'd not put a square ended rebate when the hinge end is round. In hind sight, I could have filed the end of the hinge square too. Oh well. And regarding the lining of the base, yes, you're right. I did think of it, and watched Derek's thread several weeks ago about sourcing leather, but with so many options, I ended up more confused than where I started, so considered this was still a lovely box, and could stand on its own (plus her birthday was in September last year, and with all the oopses and delays, I really wanted to give it to her).
Lance
-
29th April 2019, 06:20 PM #6GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,186
Very nice box X, great work, totally impressed.
Paul
-
29th April 2019, 08:56 PM #7
You should be proud of that effort as it looks smooth and shiny as you have realised. All the joints and fits look very neat.
I think most people do the sockets for those hinges on the Router table so doing them on the side with a chisel is thinking outside the square.
Might have to get myself one of Neil's books if it helps in producing finishes of that level.Dallas
-
30th April 2019, 01:13 AM #8SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 76
- Posts
- 768
Well done with the shellac, looks like you have mastered it.
Regards
Keith
-
30th April 2019, 09:21 AM #9SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Stunning box, in my eyes you've nailed so many aspects here - timber selection, proportions, definitely finish, one question though, how did you create this detail with the mitre keys (If you don't mind me asking)
2019-04-30 08_16_00-Clipboard01 - IrfanView.jpg
Regards, Jeff
-
30th April 2019, 10:17 AM #10
Thanks Jeff. I did spend a fair bit of time working out the proportions.
Regarding the spline ends, to be honest it's a little like "The Elves and the Shoemaker". I do some basic prep, glue up and the magic happens without my input. That's not helpful though, so let me explain.
I don't have a flat toothed blade for my table saw, so when cutting the spline slot I end up with the wedge featured end. When using a soft wood for the splines, like pine, as long as you push them hard into the corner, the glue will actually swell the edge to fill the wedges!
In this case though, as hard timbers don't swell as much, once I've cut my splines (not the slots), I take a chisel corner and scratch a groove down the back. Naturally it's not going to be a perfect fit, but as long as it's close enough, the swelling of the timber with glue will fill it out nicely. I hope that's clear. If not, I'll take some photos in the workshop for you.
Lance
-
30th April 2019, 10:33 AM #11SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Thanks Lance, that explains it perfectly.
It's a very nice touch. Even if it's out of necessity
Regards, Jeff
-
8th May 2019, 08:43 PM #12
Gee that's come up beautifully, Lance!
I can't recall, but was it at this stage at the 'get together'? The French polishing looks beautiful and really brings out the timber - even 'plain old' Tas oak... Exquisite detail in that.
Well done mate! You've a lucky MIL. Does she get to keep the marking gauge?
Regards Adam
-
8th May 2019, 09:13 PM #13
A lucky mother Adam (my MIL isn't that lucky) And no, the marking gauge is still new to me so I certainly kept it! It was just to give an idea of scale.
The box was built, but still needed a couple of coats of French Polish at the get together. No hardware was installed at the time either.
I am very happy with it.
P.S. look out for another post from me, probably tomorrow, showing off my wall hanging shelf project which I just finished this evening. It's hard work trying to stay in your wake
-
9th May 2019, 09:30 AM #14
D'oh! It appears my reading skills were not up to par last night
Great stuff, Lance - I look forward to that. Will keep my eye out (and practise my reading in the meantime )
Regards Adam
Similar Threads
-
Like his mother used to do
By groverwa in forum WOODIES JOKESReplies: 0Last Post: 15th July 2010, 09:17 PM -
Mother's Day...
By ciscokid in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 13th May 2009, 01:28 PM -
Do you like your mother-in-law?
By Wongo in forum POLLSReplies: 50Last Post: 8th April 2006, 03:06 PM -
The Mother-In-Law
By stephenmeddings in forum WOODIES JOKESReplies: 1Last Post: 21st January 2004, 08:57 PM