Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 23
Thread: Latching footswitch
-
9th May 2017, 08:45 PM #1
Latching footswitch
I have recently brought a Leigh D4 jig, I intend to use a Dewalt DW610 fixed base router with it.
However the switch is a long way from the handles and I have small hands.
I am trying to find a latching footswitch so I can keep both hands on the router on start up.
This one would be perfect, but its 3amps and my router is 4.5amps.
6289-0017 | General Purpose Foot Switch, Mild Steel Latching SPST N/O 3 A @ 250 V ac, 3 A @ 30 V dc 250V IPX2 | RS Pro
Or even a latching relay might be another option.
Any suggestions would be appreciated?
Thanks Mark
I've become a tool of my tools.
-
9th May 2017 08:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
9th May 2017, 09:12 PM #2GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
It is extremely dangerous to operate a power tool with an unprotected footswitch. The danger is that you will accidentally drop something onto, or step on, the switch while you are in an exposed position such as when changing cutters.
There are many protected switches available that will carry the load but expect to pay several times the cost of the router to get them.
https://www.google.com.au/search?q=h...ety+footswitch
-
9th May 2017, 09:31 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
Presumably you have the sense to turn the mains power off at the plug before you change the bits.
And you will retain the switch on the router ?
The way I would do it is mount the foot switch inside a sturdy narrow entrance box which prevents things falling on it or accidentally treading on it and switching it on and get the foot switch to activate a latching relay.
MY DP has a VFD on it and I installed a pedal that starts and stops the motor using the low V VFD controls, but the DP motor only runs on as long as I have a foot on the pedal. I can understand why this does not suit you.
I should put a box over that as well.
-
9th May 2017, 10:48 PM #4
I plan to make my own protective cover,and I do not wish to use a switch that has to have pressure maintained.
When using that type of switch the user can not move either of his feet.
They suck on drill presses where the user is stationary.
A drill press dose not exert sideways torque like a router which makes it desirable to brace primarily by moving your feet.
I also intend to position the switch so it is activated with a side-step hence the custom protective cover.
That said I was hoping one of members could suggest a suitable switch or switch/relay arrangement.
Since Worksafe WA has given up worrying about life and death matters, I'm glad you guys are on the job.
Please do not take offence I know you have my best interest in mind.
MarkI've become a tool of my tools.
-
10th May 2017, 12:48 AM #5GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
As you are making your own housing have a look at
Clipsal - 360 - Foot Switch, 10A, Double Pole
-
10th May 2017, 11:54 PM #6
Bohdan I had a look at that switch, but I think a more industrial switch would handle the wood dust better.
I spent my time in the workshop today making a new rear wheel for Paris and Nicole's Barbi car.
MarkI've become a tool of my tools.
-
11th May 2017, 12:02 AM #7GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
Industrial dustproof switches are about $400-$600 readily available but do you want to spend that much.
-
11th May 2017, 10:41 AM #8
I'm looking into this one.
However it doesn't mention Voltage and amperage ratings.
ZLKG047 1pc LT4 latching foot switch foot switch Silver Point Machine Parts NEW | eBayI've become a tool of my tools.
-
11th May 2017, 11:51 AM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
I have seen that one as well.
The specifications state
- Contact resistance: 50mO or less (first)
- Insulation resistance: 100MO above, 500VDC test
- Dielectric Strength: 2000V AC, 1 minute
- Mechanical life: 1 million times
- Electrical life: 100,000 times
- Humidity: 45% ~ 85% RH
The insulation resistance and dielectric strength are indicative that it can handle 250V but what we don't know is the current rating..
A lot of these pedals have standard switches inside them. It might be possible to replace the momentary switch with a latching one.
-
11th May 2017, 12:26 PM #10GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Little River
- Age
- 78
- Posts
- 1,205
That one looks like a bargain even if you have to add a contactor to handle the current.
-
12th May 2017, 11:59 AM #11Senior Member
- Join Date
- Sep 2011
- Location
- Northern Beaches, Sydney
- Age
- 68
- Posts
- 329
I would have thought a simple off the shelf protected foot switch like this one would be all you need...
ELECTRICAL MACHINE FOOT SWITCH , PEDAL SWITCH , GILLOTINE , BRAKE PRESS , PUNCH
One tap to turn it on, another tap to turn it off.
Stewie
-
12th May 2017, 01:04 PM #12.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
-
13th May 2017, 01:28 PM #13
Footswitch
I emailed the E-bay seller in Shanghai about the switch I was interested in.
He replied that the switch was AC380V and 15A.
I have purchased the switch and will receive it in June.
If I still have two feet I will post a short review once It's operational.
MarkI've become a tool of my tools.
-
13th May 2017, 03:11 PM #14.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,791
That main body and pedal of that switch looks like the one I have..
footswitches.jpg
The specs for the one I have are
- Contact resistance: 25mΩ
- Insulation resistance: 100MΩ DC500V
- Dielectric strength: ≥2000V ac
While the one on eBay has
- Contact resistance: 50mO or less (first)
- Insulation resistance: 100MO above, 500VDC test
- Dielectric Strength: 2000V AC, 1 minute
So it sounds like they use the same switch and I hope your is actually a latching switch.
The one I have is only rated by Altrsonics for 5A @ 12-48V dc and it is also a momentary switch
The reason for the low rating by Altrsonics is probably because that switch does not have an Australian certifiable rating and 48V is the highest that can be used without such a rating.
So while the bay probably is OK for mains Voltages we still have no idea what the actual Australian current rating is.
-
2nd June 2017, 11:26 PM #15
Foot switch
This is just a update.
The switch I ordered from China arrived, however it was non-latching so I chose to return it.
Return economy postage to China was $28.45 that is $3 less than purchase price.
I think most people would have kept it but I want the switch I payed for, and I know E-bay will refund return postage if I follow their rules.
Another exercise in patience.
MarkI've become a tool of my tools.