Thread: Acrylic primer not adhering to painted surface - what am I doing wrong?

It sounds like an oil or something similar is blocking the primer from penetrating the wood and causing it to lift when it dries. Might need a was down with some sugar soap or similar.

There is a line, oil over water but never water over oil. You can get a prep product that will provide a good key. One of the three in one undercoats should do it. Go to your local paint shop they will be able to give you what you need.

Thanks so much for the help guys. I have some ESP on hand - should I use that?

In the meantime, does anyone know how to remove the primer?

Regards,
Lotte

Originally Posted by LotteBum

Thanks so much for the help guys. I have some ESP on hand - should I use that?

In the meantime, does anyone know how to remove the primer?

Regards,
Lotte

Don't use ESP. Use a shellac primer such as Zinsser BIN primer or Prep-lock.

Cheers
Michael

Paint stripper might be easiest, failing that sandpaper. I'd use stripper then prep-lock

Thanks heaps for the advice. I guess I'll strip the thing and start over again, this time with some of that Zinsser stuff. Looks like all my work was a giant waste of time. I was actually originally going to use an oil based primer, but my father in law said I HAD to use acrylic, hence I went with his suggestion and the suggestion on the paint can. Yay!!

Cheers,
Lotte

Hi Lotte,
Personally I prefer to use oil base paints on timber as it seems to key to the surface better and the enamel dries much harder - read more durable than acrylic. The oil also helps seal/preserve the timber as well. In fact, I usually add a bit extra linseed oil to the primer, particularly if the timber is very old and dry.
Acrylic seems to do a better job on the plasterboard/render/hardiflex/MDF/ synthetic type materials.
Just my 2/- 's worth
Bushy

Like a lot of furniture this piece may have been cleaned with Mr Sheen or some other silicon based cleaner and there are a few of them around. If so then it's likely that enen stripping right back to bare timber may not do the job.

If it still doesn't stick properly a coat of dewaxed shellac should seal the yucky stuff into the timber and allow the paint to work.

Shellack; universal primer - everything seems to stick to it.
If stripping is ness. try Citrusnstrip (TM) or any other of the citrus oil based strippers made from the rinds of oranges, lemons, limes. This stuff is almost edible! - works just as well as the amonium choride horror liquid stripper.
Someone mentioned silicone. Could be the core of your non-sticking problem.
Good luck

Lotte, I am impressed !!!!!!!!!!!!!!!!!!!!!!!!!!
First time I have ever heard of a daughter-in-law listening to, let alone doing as a father-in-law suggests)
One of kind girl.
Best wishes from us to you for the safe and happy event
Bushy n Spud

Thank you everyone! It's still sitting as I contemplate what to do next. I think I'll do the citristrip and start all over again. It's on the front deck and I'd REALLY like to get it off and finished ASAP so that we can have the deck back, but motivation is hard to come by at the moment )

Originally Posted by Wallnut

Lotte, I am impressed !!!!!!!!!!!!!!!!!!!!!!!!!!
First time I have ever heard of a daughter-in-law listening to, let alone doing as a father-in-law suggests)
One of kind girl.
Best wishes from us to you for the safe and happy event
Bushy n Spud

Haha, thanks! My father in law is good chap, hence I do generally listen to him, unless he's baiting me

Cheers,
Lotte