Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
16th June 2023, 06:43 PM #1Senior Member
- Join Date
- Mar 2011
- Location
- Melbourne
- Posts
- 150
Advice sought: Is hardwax oil enough for a desk
I’ve picked up some oak panels with a hardwax oil applied from the ‘factory’ which i intend to to use as top for a couple of sit stand desk frames.
Normally i apply poly to everything to this is a first for me and I’m wondering is it enough for a high wear surface like a computer desk, and if not what, if anything, can be done to improve on it, ideally without having to sand/strip it off
-
16th June 2023 06:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th June 2023, 07:19 PM #2
It's what I used on my desk. The desk has been in use for the past few years without a problem.
I do have a full length mat under the keyboard and mouse, which I would recommend for other reasons anyway.
-
16th June 2023, 07:25 PM #3Intermediate Member
- Join Date
- Feb 2021
- Location
- Tasmania
- Age
- 65
- Posts
- 35
It is used as a hard wearing timber floor coating so would certainly be up to the task on a desk top.
Similar Threads
-
Cot commission ... advice sought
By DaveTTC in forum WOODWORK - GENERALReplies: 6Last Post: 29th July 2015, 07:29 PM -
Hello and advice sought
By ptmitchell in forum WOODWORK - GENERALReplies: 3Last Post: 6th July 2015, 11:47 AM -
New DC advice sought
By Glenn.Visca in forum DUST EXTRACTIONReplies: 36Last Post: 1st May 2014, 09:38 PM -
advice sought: are my legs too big ?
By damian in forum THE WORK BENCHReplies: 16Last Post: 11th May 2011, 12:19 PM -
New or Secondhand - Advice sought
By LS 11 in forum TRITON / GMCReplies: 52Last Post: 20th September 2007, 12:08 PM