Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: How to apply flocking
-
21st February 2017, 11:18 AM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
How to apply flocking
Hi, never done flocking before, so I am going to have a go at some of the Carbatec flocking, black in colour. Can anyone please advise on the best way to apply it, so that it doesn't lump, but spreads nice and evenly on the top surface of a flat piece of MDF 200 x 200? It will have 9 x 12mm holes drilled in it, that I would like coated too
I was thinking of doing a couple of coats of black paint, and putting the flocking on the 2nd coat while still wet.
Do you shake the MDF after the flocking is applied, or put it in a box to let it dry?
I would very much welcome your adviceregards,
Dengy
-
21st February 2017 11:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st February 2017, 11:47 AM #2
Hi,
The glue colour matches the flocking so you get even coverage. You shake it off when dry. At least that's how it worked for me when I did draws for some band sawed boxes.
Instructions come with the kit.
RegardsHugh
Enough is enough, more than enough is too much.
-
22nd February 2017, 07:06 AM #3Senior Member
- Join Date
- Apr 2012
- Location
- Shepparton
- Posts
- 140
the easiest way is to use the flocking applicator which is basically a tube with a bunch of holes to allow for the flocking to be applied. What ever you do don't play with the flock until the paint has dried.follow the instructions and you should be good.
Similar Threads
-
What order to apply flocking and danish oil?
By rtyuiop in forum BOX MAKINGReplies: 1Last Post: 24th November 2015, 03:08 PM -
Flocking. Is it just for looks?
By metester in forum BOX MAKINGReplies: 8Last Post: 8th April 2013, 06:51 PM -
Flocking
By Pasho in forum WOODTURNING - PEN TURNINGReplies: 23Last Post: 13th April 2009, 09:21 PM -
Flocking
By Pasho in forum BOX MAKINGReplies: 6Last Post: 3rd December 2008, 06:56 AM -
Flocking the pen box
By PenTurner in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 9th October 2008, 12:59 PM