Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Finish for Bar
-
17th April 2019, 10:07 AM #1Intermediate Member
- Join Date
- Nov 2018
- Location
- Melbourne
- Posts
- 44
Finish for Bar
Hi All
I知 currently in theprocess of restoring a home bar furniture. I知 not sure what the actual woodis. I知 sanding it down to bare wood and staining it.
Being a bar and there will be chance of alcoholand liquid drops/spillage on top. What is the best finish for this type ofproject. I知 looking for a very durable finish but at the same time I don稚want any of the finishes to change the colour.
I was thinking of applying 6 coats of tung oil andthen 2 coats of wipe-on poly. I知 looking for a matte/satin finish and not tokeen on using resin.
Anyone got any better ideas for a durable finish?
-
17th April 2019 10:07 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th April 2019, 05:36 PM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Not all poly is alcohol resistant, so be careful with that. At work we always had table tops sprayed with a 2-pack poly which is safe with alcohol.
Similar Threads
-
what finish should I use???
By IanM in forum FINISHINGReplies: 8Last Post: 10th May 2016, 02:05 AM -
What finish is that?
By neksmerj in forum METALWORK FORUMReplies: 1Last Post: 24th May 2015, 09:18 PM -
Threads on finishing, finish, good finish
By steamingbill in forum METALWORK FORUMReplies: 17Last Post: 20th January 2014, 06:53 PM -
Finish for a box
By Pauls321 in forum BOX MAKINGReplies: 6Last Post: 26th October 2013, 10:02 AM -
Cutting 2-Pac Matt Finish to get a satin finish
By Brendon5374 in forum FINISHINGReplies: 8Last Post: 1st February 2011, 11:55 PM