Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
3rd January 2015, 07:55 PM #1Novice
- Join Date
- Aug 2008
- Location
- Toowoomba
- Posts
- 21
Finish for one indoor & one outdoor Blackbut slab table
I am making two slab tables for a friend. The inside table will have steel frame legs & the outside one will have timber legs. I have the following queries.
1. Can U beauts Hard Shellac be used for an outdoor table. It will be under a roof, therefore out of direct sunlight but not rain in the event of storms.
2. The info sheet for Hard Shellac says it is ideal for table tops & other horizontal surfaces. Does this mean that there is some issue applying it on the legs for some reason?
3. The slabs are being left with some of the chainsaw marks from the Lucas Mill. Will these recesses cause any issues with a finish.
4. Can Hard Shellac be recoated and/or repaired?
5. Would Danish Oil be OK for one or both of these tables? A flat finish is required.
Any other comments or suggestions will be appreciated.
Thanks in anticipation
-
3rd January 2015 07:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Help with finishing indoor Teak table for outdoor use?
By weemingboon in forum FINISHINGReplies: 1Last Post: 5th August 2012, 05:59 PM -
Best finish for new outdoor dining table
By Ghallahad in forum FINISHINGReplies: 2Last Post: 14th January 2012, 07:35 AM -
Outdoor Slab Table. Help needed!
By stoobs99 in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 7Last Post: 28th October 2011, 09:53 PM -
Looking for a good slab for outdoor table
By GregLee in forum TIMBERReplies: 18Last Post: 30th June 2004, 11:07 AM -
Outdoor Table Slab Moisture content.
By Tasman in forum TIMBERReplies: 3Last Post: 30th July 2003, 11:52 PM