Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2015
    Location
    Perth
    Posts
    2

    Default Finishing Jarrah slab

    Hi there
    i have a wonderfull Jarrah slab and I've finished it with bondall monocel clear timber varnish SATIN. this has made the timber very dark altho Jarrah is a natural dark timber i wanted the natural red colours more so than a dark colour.
    My friend has a slab from the same tree finished with a 2 pack clear lacquer (first picture) and his finish and colour is what i wanted
    Can someone tell me where i went wrong ?
    friends slab.JPGmy slab prior to finish.jpgMy slab.jpg My clear.JPG
    Note the picture with my clear and how the stirring stick kept its original colour.
    My friends slab has had 4 coats sprayed on of lacquer. mine has had 2 unthinned coats with a brush
    Any advice would be appreciated before i break out the sander
    Last edited by smerdo; 13th March 2015 at 11:00 PM. Reason: additional info

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    Nothing you can do for it now aside from breaking out the sander. Make sure it's had plenty of time to dry otherwise you might have lots of clogged up sandpaper on your hands!

    I've always found that lacquers will give a lighter finish than an oil based varnish; I attribute this to the oil content soaking deeper into the timber, while the lacquer sits on top. (I particularly like automotive clear if I want the clearest possible finish as it's the closest I've found to 'clear', not amber like oil varnishes, or blue-ish like some of the water based varnishes).

    Always test a finish on a timber if it's first time you've used it - generally what you see when it hits the wood is the finish you're going to get, and no, it's not going to change too much when it dries.

    I would expect your mate's slab to slowly loose its red colouring over time, getting closer to a jarrah brown. (I've been meaning to test the idea of using red stain to re-red old jarrah, but haven't had anything to test it on!)

  4. #3
    Join Date
    Mar 2015
    Location
    Perth
    Posts
    2

    Default

    Thank you for your reply
    Can i use a lacquer followed by my polyurethene as it is a outdoor item and i want it to be hard wearing ?

  5. #4
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    If you like the finish on your mate's slab, I'd suggest using whatever it was that he used!*

    Hard wearing for outdoors (for me) consists of: 3-4 coats of marine epoxy followed by 2-3 coats of polyurethane to protect the epoxy from UV. (the epoxy provides the water protection, the poly is just there to protect the epoxy from UV, as that's the Achilles heel of epoxy).

    Either way, expect to redo the poly (scuff sand and recoat) on weather exposed surfaces every couple of years to keep the protection up.

    And always do a test piece to make sure that the final finish looks the way you want!

    *If by two-pac you mean isocyanate two-pac, and it was applied by spray and you want to do the same, add a quality (Sundstrom or similar) face mask and organic vapour cartridge (cartridge $30, mask $40) and one of those disposable suits to your shopping list. Don't use the cartridge for more than about four hours till you retire it to 'non-iso' use only (you can't tell by smell when the cartridge is letting isocyanate vapours through, so it's best to consider them a use-once proposition). Or get your mate to finish it!

  6. #5
    Join Date
    Nov 2010
    Location
    Perth W.A
    Posts
    720

    Default

    I have used Becker Acroma DM307 on jarrah with a 30%gloss which gives a nice finish
    I sprayed mine outside as I dont have a spray booth.

Similar Threads

  1. Finishing a Jarrah slab table with Rustins plastic coating.
    By Grainonthebrain in forum FINISHING
    Replies: 1
    Last Post: 19th July 2011, 10:11 PM
  2. Finishing off 18 large Jarrah slab window sills
    By PaulM in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 6
    Last Post: 2nd January 2009, 10:04 PM
  3. Jarrah slab requires finishing - help
    By missy in forum WOODWORK - GENERAL
    Replies: 1
    Last Post: 11th December 2007, 06:25 PM
  4. Jarrah slab requires finishing - help
    By missy in forum FINISHING
    Replies: 0
    Last Post: 11th December 2007, 05:30 PM
  5. Jarrah Slab?
    By corbs in forum TIMBER
    Replies: 4
    Last Post: 26th June 2005, 09:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •