Results 1 to 10 of 10
  1. #1
    Join Date
    Jun 2018
    Location
    Penrith
    Age
    46
    Posts
    18

    Default Help: Live Edge Slab Gaps Filled With Epoxy Resin, Now How to Finish?

    Hey Everyone

    Firstly just want to say a massive thanks to all you legends who are so willing to share from your experience and help out amateurs like me

    Making for my wife’s birthday a 1000mm by 400mm live edge Coffee Table in Norfolk Pine. Very happy with the grains and the natural imperfections which I have just filled with Epoxy Resin (Liquid Gloss is the brand). I have poured the Resin in, waited 24 hours and then poured again and repeated till all the cracks/knots and natural gaps were filled. I have over filled them slightly so the Resin sits a good 3-4mm or so above the slab. I want the table to have a very natural and oiled finish not a glossy poly finish. Obviously the resin will be glossy and i want it to be crystal clear to see all the details through the imperfections and knots but the rest of the top I just want the natural grains to pop and I want an overall Matte or oil finish.

    I now at the stage of bringing the Resin back to the level of the slab.

    How do I do this in terms of sanding? I have a belt sander and finishing sander. Should it all be done by hand? What grade sand paper should I use? I’m mindful of not wanting to eat into the surrounding timber so it creates divets or lows spots around the Resin. Any tips/advice would be greatly appreciated

    thanks!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2018
    Location
    Newcastle
    Posts
    1,014

    Default

    Soften with a heat gun and use a sharp chisel to remove most of the excess before sanding (I believe). There are some good youtube vids on finishing live edge/resin

  4. #3
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    The trick to sanding epoxy is to minimise heat, if it gets too warm it will go sticky and your sandpaper will clog up very quickly. For removing bulk material with a belt sander you want to get super coarse paper, about 60 grit is good, to help prevent it clogging. If your sander has variable speed, slow it down; again prevents clogging. Once you're close to level you can go back to sanding as you normally would.

    Be careful using heat and a chisel; it does work but the resin will become a bit elastic and stretch out as you're cutting, so you might end up under the surface when it springs back. Done that one before

  5. #4
    Join Date
    Jun 2018
    Location
    Penrith
    Age
    46
    Posts
    18

    Default

    UPDATE: thanks for all your help everyone. For my first go, i was very happy with the results. Thoughts I’d show you all the finished product The Epoxy looked crystal clear and really help accentuate those natural knot and grain imperfections!1D83DED6-E389-4128-A929-1EEDEEDC8B7C.jpgB451D33B-49FD-416D-8187-3E350E05EF24.jpg07672F04-4070-472C-982C-A26FC96B6FA4.jpgB6EBA661-67E6-4641-944F-87A0213A59A7.jpg508A0C39-2239-4495-9985-3D0704413DD3.jpg
    Attached Images Attached Images

  6. #5
    Join Date
    Mar 2011
    Location
    melbourne
    Posts
    24

    Default

    Looks great.
    What finish did you end up using on the wood?

  7. #6
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    sort of off topic but, years ago I did a redgum coffee table with live edges all around.
    There were a couple of big voids and one being on the edge. I blacked off one side pored the resin in and while setting threw a plastic frog in. Wow talk about animal cruelty abuse etc. One dipstick friend(?) of wifey came around, saw the frog, left and notified police and RSPCA.

    one of those time you wish video was going. but sorry pictures have disappeared
    I would love to grow my own food, but I can not find bacon seeds

  8. #7
    Join Date
    Jun 2018
    Location
    Penrith
    Age
    46
    Posts
    18

    Default

    I ended using:

    30% Mineral Turpentine
    30% Tung Oil
    40% Clear Polyurethane

  9. #8
    Join Date
    Jun 2018
    Location
    Penrith
    Age
    46
    Posts
    18

    Default

    Wow! That’s a great story, I will have to confess that that Dipstick friend wouldn’t have been my favourite person

  10. #9
    Join Date
    Dec 2003
    Location
    lower eyre peninsular
    Age
    74
    Posts
    3,577

    Default

    wifes friend not mine. and didnt surprise us either. authorities had a good laugh and took a few pics...for those funny time the RSPCA guy said.
    I would love to grow my own food, but I can not find bacon seeds

  11. #10
    Join Date
    Dec 2013
    Location
    Adelaide
    Posts
    132

    Default

    Great thread. I was going to use Norglass Liquid Glass on mine. Any good guys?

Similar Threads

  1. Replies: 7
    Last Post: 1st September 2017, 04:53 PM
  2. Finish for Austraian Cedar live edge desk
    By timsydney in forum FINISHING
    Replies: 12
    Last Post: 16th December 2016, 11:44 AM
  3. Joining live edge Marri\Redgum Table legs to Slab
    By Btalmage in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 4
    Last Post: 23rd December 2014, 04:32 PM
  4. EPOXY (HIGH CLARITY) RESIN + HARDENDER (2:1 RATIO)EPOXY
    By Lyle in forum WOODTURNING - GENERAL
    Replies: 8
    Last Post: 9th May 2014, 06:48 PM
  5. Epoxy resin filled woodart?
    By matthew P in forum WOODWORK - GENERAL
    Replies: 7
    Last Post: 12th March 2008, 08:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •