Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Problem with a Jacaranda bowl.
-
9th March 2018, 08:57 AM #1Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Problem with a Jacaranda bowl.
I have a jacaranda bowl that I tried to coat, unsuccessfully, with CA. I sanded all of this off and
tried to re-coat with Liberon finishing oil. So far two coats.The inside is OK but the outside is patchy,
and I am running out of oil. Should I persist with further coats? Or will Feast and Watson Scandanavian
oil go over the top of the Liberon?
If the Scandanavian does not work, what is the best method to remove Liberon?
It has been suggested that I use EEE after an initial sanding with 320 or 360.
All help appreciated. Thanx, artme.
-
9th March 2018 08:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Jacaranda bowl and ebonising...
By Faulko in forum WOODTURNING - GENERALReplies: 17Last Post: 6th January 2016, 09:39 PM -
Jacaranda salad bowl
By wood hacker in forum WOODTURNING - GENERALReplies: 9Last Post: 20th January 2013, 08:45 PM -
jacaranda bowl
By smiife in forum WOODTURNING - GENERALReplies: 11Last Post: 3rd May 2012, 02:09 PM -
jacaranda bowl
By smiife in forum WOODTURNING - GENERALReplies: 5Last Post: 18th November 2010, 07:13 PM -
Jacaranda Bowl
By jhunt_2000 in forum WOODWORK PICSReplies: 6Last Post: 31st December 2003, 10:20 PM