Needs Pictures: 0
Results 31 to 31 of 31
-
19th June 2018, 07:51 PM #31
Not for those tests. For the other side I have used a sanding sealer first to raise the grain, and rather than sanding with 240 in between I'm using 500. I will also be doing 3-4 thin coats. If that doesn't work then I might wipe it down with Armorall and see if that repels the fluids (it should - I think it's Silicone based).
-
19th June 2018 07:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Osmo Polyx 'Raw' first impressions
By hurcorh in forum FINISHINGReplies: 15Last Post: 9th June 2018, 05:08 AM -
Osmo PolyX/top coat
By qwertyu in forum FINISHINGReplies: 36Last Post: 17th April 2018, 08:34 PM -
Compatible stains/tints for OSMO polyx?
By 44Ronin in forum FINISHINGReplies: 2Last Post: 9th March 2018, 12:41 PM -
Tung oil over Osmo
By Twist in forum FINISHINGReplies: 1Last Post: 17th July 2017, 05:14 AM -
Osmo Polyx-oil
By scottbr in forum FINISHINGReplies: 4Last Post: 11th January 2011, 10:33 AM