Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
21st January 2017, 02:39 PM #1
What top coat for these shop cabinet drawer faces please?
IMG_8877.jpg
These are shop cabinet drawers.
They are made from 18mm ply with hard wood onion skin.
I've already applied two coats of sanding filler.
Feast Watson 250ml Sanding Sealer
I/N: 1564778
Once I sand all the sanding filler off,
what top coat should I use?
Feast Watson Sanding Sealer doesn't say whether its oil or water based.
Just reading thru some of the descriptions I was thinking about glass polish.
Any suggestions for the top coat for the 18mm ply with hard wood onion skin?
thanks in advance.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
21st January 2017 02:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st January 2017, 02:52 PM #2
Just got off the phone with Feast Watson helpline.
The sanding sealer is oil based.
(didn't say on the can)
For the shop and best durability he suggested
glass finish - high build - one coat
or
floor clear - 2 to 3 coats
these have strong solvent odor
use adolox sandpaper for the sanding sealer its grey aliminimThanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
21st January 2017, 08:36 PM #3
Never mind.
The lady have nixed the idea.Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
21st January 2017, 09:14 PM #4Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
It says on the can that if spraying thin with mineral turpentine - contents states it contains liquid hydrocarbons. That's generally a good indication.
-
22nd January 2017, 09:59 AM #5
-
24th January 2017, 10:35 AM #6
Thanks heaps gents.
so "liquid hydrocarbons" = oil based ?Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
24th January 2017, 11:57 AM #7
or solvent based -- you need to check the information on thinning and for cleaning up.
regards from Alberta, Canada
ian
-
26th January 2017, 07:57 PM #8
Oil/ solvent bassed realy does not give much information.
You realy want to know the resin family ...... most modern "varnishes" and their sanding sealers are pollyeurathane ...... older generatioons of varnishes where Alkalide ..... similar to traditional enamel paints ....... the two resin familises don't play well together.
The you get into Acrillic and nitry bassed solvent laquers.
you realy need to know your resin family not just the solvent or carrier.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
Similar Threads
-
Wood for Cabinet faces?
By columnmn in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 2Last Post: 29th November 2016, 12:15 PM -
Cabinet Drawer Slides
By michaeljohn1234 in forum WOODWORK - GENERALReplies: 6Last Post: 14th March 2011, 05:52 PM -
Installing inset drawer faces process
By Dewayne in forum WOODWORK - GENERALReplies: 7Last Post: 15th October 2008, 04:19 PM -
Bookshelf/drawer Cabinet
By Gibbo in forum WOODWORK PICSReplies: 7Last Post: 29th September 2008, 09:03 AM -
Offroad drawer cabinet...
By MaloCS in forum WOODWORK - GENERALReplies: 9Last Post: 28th January 2006, 07:42 PM