Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Varnish -- Issues
-
15th June 2012, 06:09 AM #1New Member
- Join Date
- Jun 2012
- Location
- Montana
- Posts
- 1
Varnish -- Issues
I'm new here, so I apologize if this post is in the wrong area.
Story: I spilled a bottle of nail polish remover on a wooden table. It didn't removed the finish, just the varnish. I ran and bought a sanding sponge thing and a semi-gloss and a satin varnish. I sanded the area and applied the satin first -- it wasn't shiny enough. I sanded it again and applied the semi-gloss. It matches, but now there are obvious edges to it.
Obviously, I have no idea what I'm doing. It's sort of an urgent issue -- this is my cousin's table.
Can anyone help?
-
15th June 2012 06:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th June 2012, 07:34 AM #2
If you are having trouble matching, take it all off and start again. You shouldn't need to sand, just use fine steel wool as you remove the old finish.
Similar Threads
-
what is the defference between cellulose varnish and syntitic varnish
By kadirou830 in forum FINISHINGReplies: 2Last Post: 18th September 2011, 07:19 AM -
T nut issues
By Stustoys in forum METALWORK FORUMReplies: 41Last Post: 13th September 2010, 09:20 AM -
MBS 300 Issues
By pellcorp in forum TABLE SAWS & COMBINATIONSReplies: 10Last Post: 2nd November 2009, 07:46 PM -
Do i have issues??
By nz_carver in forum WOODCARVING AND SCULPTUREReplies: 17Last Post: 11th December 2008, 02:18 PM -
OHS Issues
By Grunt in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 14Last Post: 30th August 2004, 01:03 AM