Results 1 to 14 of 14
  1. #1
    Join Date
    Nov 2016
    Location
    Cairnlea
    Age
    30
    Posts
    29

    Default Making wipe on poly

    Hi all, i've been trying to make some wipe on poly but when i mix with methylated spirits the oil based polyurethane goes gluggy and doesnt mix together. Am i doing something wrong. Here is the dinning table im painting its Australian red cedar

    Sent from my SM-A530F using Tapatalk

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    776

    Default

    I have been using white spirits (for dry cleaning) and it works beautifully Adem, and I mean beautiful. I just use an old soft cloth from winter undershirts, folded and wipe it on kind of like brushing, just one or two sweeps and move on. Don't sue metho as it is not compatible. Mix 50/50 in enough of an amount you will use within the next few days, no more

  4. #3
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by adem View Post
    Hi all, i've been trying to make some wipe on poly but when i mix with methylated spirits the oil based polyurethane goes gluggy and doesnt mix together. Am i doing something wrong.
    depending on where you purchased your "metho" and how old it is, the water content of the "metho" can be 50% or more.
    as Bob suggests you need to use a petroleum solvent with an oil based finish.
    regards from Alberta, Canada

    ian

  5. #4
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    776

    Default

    Shellac = metho
    Poly = shellite or similar (white spirits, which I 'think' is a more refined turps, like paint thinner)

    Not sure of the chemistry behind it but I know you need to remember the difference, in any case they behave quite differently

  6. #5
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    776

    Default

    By the way - I WANT THAT SLAB

  7. #6
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    regards from Alberta, Canada

    ian

  8. #7
    Join Date
    Nov 2016
    Location
    Cairnlea
    Age
    30
    Posts
    29

    Default

    Thank you for that info Bob, ill give it a try and yes it is nice slab.

    Sent from my SM-A530F using Tapatalk

  9. #8
    Join Date
    Nov 2016
    Location
    Cairnlea
    Age
    30
    Posts
    29

    Default

    Ian it just digger brand and purchased it last week.

    Sent from my SM-A530F using Tapatalk

  10. #9
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    For toys, not furniture I make up a wipe on poly from the following formula...
    30% Pure Tung Oil
    40% Clear Satin Polyurethane [oil based]
    30% Turps
    Someone on the forum gave me that formula a couple of years back and it works great for me...

    This was the latest toy truck with Australian red cedar bonnet.... .rDSC03829.jpg rDSC03828.jpg

    Cheers, crowie

  11. #10
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    776

    Default

    Yes, good you mentioned that Crowie!

    Did a table top the other week. It was a rescued old farmhouse table I managed to end up with a breakfast table out of it for the client (Nostalgic reasons, about 125 years old, in the family for generations but last 50 years in the shed being abused, sigh!)

    The wood was SO soft I fretted over it and did that same mix you mentuion for the first two coats, just with BLO instead of Tung oil (coz that's what I had ). Worked a treat. The oil helps the mix bite in deeper. I followed up with about 8 coats of the poly/shellite mix. Here's the result

    finished top.jpg

    I tested for durability on a scrap and was real pleased.

  12. #11
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    469

    Default

    Hi allI,

    Is the wipe on poly you can get from Bunnings no good, or just pricy compared to a homebrew recipe?

  13. #12
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    776

    Default

    It's good alright, but way too pricey

    Sent from my E6633 using Tapatalk

  14. #13
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    Quote Originally Posted by taz01 View Post
    Hi allI,

    Is the wipe on poly you can get from Bunnings no good, or just pricy compared to a homebrew recipe?
    I make my own as was recommended to me and only do it in small quantities....
    I got the Satin Polyurethane from Bunnings on special, plus turps from them while purchasing the Tung Oil direct from Scenerys in Melbourne

  15. #14
    Join Date
    Oct 2010
    Location
    Drouin Vic.
    Posts
    166

    Default

    I mostly use PreCat spray finishes but as a retired paint chemist I also often make my own coatings for use on small articles.I sometimes use shellac based sealers and blends of tung oil/orange oil/wax for specific topcoats. This material can be easily wiped on as the orange oil is a slow drying component. One other option to consider with your Tung Oil is to dilute with some pure tupentine that is available at most hardware outlets. This is a good solvent for tung oil as well as in solvent based PU Alkyds such as Cabothane etc. I have also seen poor results from using weaker solvents such as white spirits and some retail "mineral Turps" where the strength (aromatic content) is lower than pure turps and causes milky films on drying. This milky effect can be quite pronounced under adverse weather such as lower temperatures in winter. Some "mineral Turps" retailed in Australia are not high quality and care is required to source a reliable supplier.
    Paintman

Similar Threads

  1. Wipe on Poly
    By har7801 in forum FINISHING
    Replies: 8
    Last Post: 27th May 2010, 03:19 AM
  2. Wipe on poly
    By David Mitchell in forum WOODTURNING - PEN TURNING
    Replies: 6
    Last Post: 17th January 2009, 11:10 PM
  3. Wipe on Poly - Where to get some
    By Fireguard in forum FINISHING
    Replies: 8
    Last Post: 16th July 2008, 03:52 PM
  4. Getting The Most Out Of Wipe-on Poly
    By DPB in forum FINISHING
    Replies: 7
    Last Post: 7th May 2006, 08:40 PM
  5. Wipe on Poly
    By Lignum in forum FINISHING
    Replies: 0
    Last Post: 26th February 2006, 06:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •