Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
12th April 2011, 07:15 PM #1
buff with foam pads or lambswool bonnets
wondering what the consesus is on this
i bought some expensvie foam pads in 3 grades
the first one worked very well and cut from 1200 grit sand up to very close to a full gloss
problem is it is all eaten around the edges where it grabbed into the pick up routs
not sure how well it will work 2nd time around
are these single use only or can they be used when ratty looking?
what do you blokes use, foam or lambswool?ray c
dunno what's more fun, buyin' the tools or usin' em'
-
12th April 2011 07:15 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th April 2011, 08:06 PM #2GOLD MEMBER
- Join Date
- Dec 2008
- Location
- Bradbury
- Posts
- 1,429
I used foam pads on a cordless drill on the prs i just built. They worked a treat. I broke the sharp edge on all the cavities with sandpaper first so it didnt wreck the pads. Could be worth trying..Never used lambswool so I cant really comment
-
14th April 2011, 02:54 PM #3Senior Member
- Join Date
- Apr 2008
- Location
- Wollongong, NSW
- Age
- 56
- Posts
- 178
Ray, I used to use the stewmac foam buffing pads with reasonable success ( A separate pad for each compound of course ) .
I've never had much luck with a lambswool bonnet, the only time I tried I found I couldn't get the same sort of contact I could with the foam pad.
I've since upgraded to a proper pedestal buffer and not looked back.
-
15th April 2011, 11:54 PM #4
I did the lambswool thing back in the eighties, but since then I've gone onto Foam pads, different grades, and shapes.
The lambswool bonnets for hand-held polishers were a throwback from the Automotive trade and once 2 pack paints started to find it's way into the market, lambswool became way too problematic
in maintaining a good buff up without a great deal of swirl and rotational scratching. More expensive also. I prefer foam pads with nitro also.
Foam pads have been the mainstay for the last 20-25 years as they are more manageable, can produce a better scratch-free finish, easier to control your buffing pressure,and as long as you use don't mix your compounds from each pad, you'll be on track to a perfect result. (i.e. coarse compound pad, then switch to burnish pad, then non-swirl polish pad as opposed to one pad then going through buff grades.)
In relation to taking chunks out of your foam pads, this only occurs due to not understanding the rotation of your pad. Just like using a grinder, you never want your foam pad to dig in towards an edge, rather it should move over and away.
As you go over each different edge and move into different areas, you need to modify your approach angle so you minimise edge dig and also applying too much heat in the one area. I also use a water spray bottle over each area to help lubricate the buffing compound and help reduce the heat friction, which in turn can be the undoing of a good finish if things heat up way too quickly. The last point is especially applicable with buffing any type of clear or paint over a wood substrate. The excessive heat will cause timber swelling underneath and show up the swollen grain in a mirror finish.
-
16th April 2011, 12:56 AM #5
thanks all for the input
my approach has been to date very primitive
i did get some excellent auto glym compounds from millsomes which really helped things along no end and the foam buffs seem to work better than my old motheaten lambswool bonnets
to date my attempts at high gloss have been acceptable but to my eye but not quite where i want them to be - using a power drill is not the ideal way to go but cant go a dedicated machine right now-
i have to confess my last 8 guitars have all been hand polished and oiledray c
dunno what's more fun, buyin' the tools or usin' em'
Similar Threads
-
Best Knee-Pads?..
By Batpig in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 14Last Post: 3rd July 2009, 10:42 AM -
Large Lambswool Applicator?
By Yutrut in forum FINISHINGReplies: 1Last Post: 17th February 2009, 08:01 PM -
Large Lambswool Applicator
By Yutrut in forum WOODWORK - GENERALReplies: 0Last Post: 17th February 2009, 10:39 AM -
Alternative for lambswool applicator?
By jur in forum FINISHINGReplies: 4Last Post: 20th December 2004, 04:37 PM