Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
-
28th November 2014, 07:58 PM #1Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
Drum sander question.....sandpaper?
hi all....just building a drum sander ATM. What I do need is some info on what people use re abrasive sheet/belt etc to wrap around the drum and how to attach it at the ends. I think a hose clip might do the trick but can anyone suggest something better. Thanks in advance....Graeme
-
28th November 2014 07:58 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th November 2014, 11:00 PM #2
You are probley asking in the wrong place on the forum.
There have been a few drum sanders built before.
I'll see if I can find the links.
If you are wanting to use it to reduce the thickness of the timber, use a course grit like 80 or 100.
If you are wanting to just smooth the surface, use 180 or 240.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
29th November 2014, 11:04 PM #3
Here are the links to past threads.
https://www.woodworkforums.com/f44/boring-drum-sander-build-166500
https://www.woodworkforums.com/f44/home-drum-sander-100115
https://www.woodworkforums.com/f44/home-drum-sander-37107
https://www.woodworkforums.com/f11/building-drum-sander-67772
https://www.woodworkforums.com/f11/building-thickness-sander-wip-172096
https://www.woodworkforums.com/f44/home-drum-sander-112441
https://www.woodworkforums.com/f44/huge-drum-sander-47750
https://www.woodworkforums.com/f11/own-drum-sander-162171
https://www.woodworkforums.com/f155/drum-sander-101153
That should keep you busy for a while.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
30th November 2014, 03:12 PM #4Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
-
30th November 2014, 04:44 PM #5
Sandpaperman sells long rolls of cloth backed in differing grit sizes
regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
30th November 2014, 07:34 PM #6Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
-
4th December 2014, 11:10 PM #7GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,193
I built a drum sander about two years ago. All my pics would be there under my name. On my drum I attached adhesive backed velcro. Then bought the rolls of sandpaper with the loop back to grab to the velcro.
I only use the 120 grit now And my drum sander works like a charm.
Paul
-
5th December 2014, 08:13 AM #8Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
thanks...
hi Paul. I thought the 100 grit might be the go but now I`ll have to consider the 120. I also decided to go the plain cloth backed roll. I am actually making the final cut over the drum today. At the mens shed where I go they have a metal lathe and I will do a power feed run to get a dead straight drum.....yeehaaa. I miss my metal lathe...went when we moved.. cheers, Graeme
-
5th December 2014, 10:11 AM #9SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Gippsland Victoria
- Posts
- 706
sandpaper drum
Wow thats a very accurate way to do it.
Mine is rough as guts compared to yours, I followed the idea discussed on various other builds of creating the final drum surface by mounting a big sandpaper block on the table and raising the table to kiss the drum - that guarantees that drum surface is parallel to table - drum could be slightly tapered but it doesnt matter.
Bill
-
5th December 2014, 01:37 PM #10Retired
- Join Date
- May 2012
- Location
- Canberra
- Posts
- 1,820
SteamingBills method of drum levelling works a charm. The parallel-ness of the drum to the table is super super important.
Although mine is a second hand carbatech, I took the time to shim it using slivers cut from coke cans. They are very flat, very uniform and exactly 0.25mm.... shimming up, sand, measure board thickness both sides, repeat until its dead accurate on both sides. Doesn't take long.
Making one is highly satisfying and there ar some extremely good threads, plans and videos out there to do so.
-
5th December 2014, 02:45 PM #11
Been waiting for some pics to appear
I guess it has to be on my to do list also since I started this CGB thing. I have mulled over the idea of running a drum on my lathe but the hastle of setting up and taking it off again for each job is holding me back. I am now thinking that one of those very basic GMC lathes may be the base to build a drum sander around.
Regards
John
-
5th December 2014, 02:46 PM #12SENIOR MEMBER
- Join Date
- May 2013
- Location
- Somerset Region, Qld, AU.
- Age
- 66
- Posts
- 602
You might find this Youtube video interesting ...... https://www.youtube.com/watch?v=tUJi...klww1YojZN-KiQ
The video was released only in the last day or so. His design for the Drum Sander that he discusses in the video has some interesting features - in particular, how he addresses the issue of changing the sand paper quickly between different grades. Personally, when I get round to building one next year I'll opt to use steel for better rigidity, less slop in the mechanism, etc. Not sure that I like this guy's use of MDF for the structure, but then he is designing it for woodworkers to build. The main feature I like about the drum sander in this video is that he has combined conveyor belt feed drum sander functionality with a SandFlee style sanding table on top of the drum.
Regards,
RoyManufacturer of the Finest Quality Off-Cuts.
-
5th December 2014, 05:41 PM #13SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Gippsland Victoria
- Posts
- 706
Pictures
Have a look here
http://woodgears.ca/sander/thickness.html
If you've not seen it before the whole site is worth a browse from the top down
Bill
-
6th December 2014, 03:37 PM #14Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
I was going to do the flattening with a sand papered board until I thought of the metal lathe and I think the lathe will work well. Murphy`s law prevailed yesterday however as the metal lathe was busy then not working....daym. Anyhoo, a friend there has a lathe and I`ll do it there...beauty. cheers, Graeme
-
6th December 2014, 03:38 PM #15Member
- Join Date
- Oct 2009
- Location
- Newcastle, NSW, Australia
- Posts
- 66
Similar Threads
-
Sandpaper for a carbatec drum sander WDS400
By Evanism in forum WOODWORK - GENERALReplies: 12Last Post: 15th September 2013, 02:25 AM -
Does Sandpaper direction matter for drum sander
By Arron in forum GENERAL & SMALL MACHINERYReplies: 6Last Post: 15th August 2013, 04:31 AM -
Drum Sander & Sandpaper
By burraboy in forum GENERAL & SMALL MACHINERYReplies: 11Last Post: 10th February 2013, 08:02 PM -
Looking for Drum sander sandpaper
By Deaner in forum HAND TOOLS - POWEREDReplies: 1Last Post: 5th March 2006, 09:40 AM -
Sandpaper & drum sander
By peter_j_h in forum HAND TOOLS - POWEREDReplies: 0Last Post: 7th March 2003, 10:57 AM