Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2011
    Location
    Valla Beach
    Posts
    1,184

    Default Glueing binding to a guitar body

    Hi all,

    I am looking at putting black plastic binding around the top and bottom of the body for a telecaster style guitar body. The body is made from Australian Red Cedar. I don't want any of the glue running into the ARC as I feel it will make it look all blotchy and of course that wont sand out.

    I was thinking the black binding would look great matching a black scratch plate, but I don't want to mess it up.

    Any thoughts regarding this and the glue type?

    Paul

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2011
    Location
    Valla Beach
    Posts
    1,184

    Default

    Decided not to use the binding, after having it almost finished. The ARC looks nice as is.

    Paul

  4. #3
    Join Date
    Aug 2008
    Location
    Melbourne
    Posts
    166

    Default

    If anyone is still reading, I'm still interested in answers on plastic binding glue types, even though Paul has gone unbound!

  5. #4
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    Acetone is what is used, tape binding in place then with a syringe dribble the acetone between the plastic binding and timber. The acetone melts the binding on to the body.
    I would prefer to use timber binding as the plastic stuff ends up shrinking over time and comes away from the timber.

  6. #5
    Join Date
    Sep 2011
    Location
    Valla Beach
    Posts
    1,184

    Default

    hi Cal, interesting theory, wouldnt the acetone run into the ARC and leave blotchy marks on it?

    Paul

  7. #6
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    I don’t think that it would make the plastic binding soak in to the wrc, but I would seal the binding channels with shellac first to stop the acetone running past the channels and evaporate before the binding bonds to the timber. It would only need a light coating of shellac. Try it out on a scrap bit with and without the shellac and see if it works for you. The acetone won’t stain the timber in any way as it will evaporate.

  8. #7
    Join Date
    Sep 2011
    Location
    Valla Beach
    Posts
    1,184

    Default

    Hi Cal and thanks for your comments. I'm not going to worry about the binding now. I've had the guitar together and I think it looks better without worrying about binding. I routered a nice gentle roundover edge around the top and bottom. (as I have seen Telecasters have those). I've put 3 coats of conductive shielding paint into the pickup and electronics cavities. I'm going to buy some ingredients today to make my own WOP and then I ordered a can of Behlens buffing polish. Hopefully this will give me a lovely finish. I did buy a can of spray lacquer, semi gloss, but on testing it out on an offcut of the ARC, the finish was rather flat and dullish. Wasn't that happy with that.

    Paul

  9. #8
    Join Date
    Feb 2016
    Location
    Canberra
    Posts
    5,124

    Default

    for the perfling, to stop glue runoff and penetration, one uses a wipe of shellac.

    To glue, use either CA or epoxy. Scrape when dry.

    This is exactly what to do for the rosette. No different.

    I learned these techniques from:

    -- Bogdanovich: Classic Guitar Making
    -- Luthiers Mercantile Int'l (@luthiersmercantile)
    -- Yvo Haven (@luthierhaven)

    and of course StewMac (@stewmac_guitar)

  10. #9
    Join Date
    Feb 2015
    Location
    Strathalbyn South Australia
    Posts
    1,141

    Default

    Quote Originally Posted by woodPixel View Post
    for the perfling, to stop glue runoff and penetration, one uses a wipe of shellac.

    To glue, use either CA or epoxy. Scrape when dry.

    This is exactly what to do for the rosette. No different.

    I learned these techniques from:

    -- Bogdanovich: Classic Guitar Making
    -- Luthiers Mercantile Int'l (@luthiersmercantile)
    -- Yvo Haven (@luthierhaven)

    and of course StewMac (@stewmac_guitar)
    Except for when gluing nitrocellulose or plastic binding, that is where the acetone comes in to its own, completely compatible with both the above for use as a glue. It bonds the binding by melting the back of the binding into the timber. And I agree about the shellac seal in the binding slot (which I mentioned in my previous post)

  11. #10
    Join Date
    Dec 2005
    Location
    Brisbane
    Age
    53
    Posts
    293

    Default

    Interesting that all kinds of glue/acetone are being recommended here. I've been using contact adhesive for 15 years simply because that's what Stewmac recommended at the time. Never had any issues with (plastic) binding from it, it bonds the binding into the wood very well. I used to order the Weld-On brand tubes that Stewmac supplied at the time. They don't carry that brand anymore in favour of their own in-house one but won't ship it over air. I've switched to UHU branded one since its available at Bunnings, no problems with that one either, all good.

Similar Threads

  1. Guitar body top
    By dai sensei in forum CASTING & STABILISATION
    Replies: 4
    Last Post: 30th September 2017, 10:46 AM
  2. Guitar Body Chanels
    By dlannetts in forum MUSICAL INSTRUMENTS
    Replies: 3
    Last Post: 21st January 2012, 12:31 PM
  3. glue question - guitar binding
    By old_picker in forum GLUE
    Replies: 12
    Last Post: 16th April 2006, 12:09 PM
  4. Guitar binding question
    By old_picker in forum HAND TOOLS - POWERED
    Replies: 1
    Last Post: 7th April 2006, 11:26 PM
  5. Guitar body
    By Strungout in forum WOODWORK - GENERAL
    Replies: 1
    Last Post: 28th July 2003, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •