Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
-
22nd August 2014, 12:53 AM #1New Member
- Join Date
- Aug 2014
- Location
- Australia
- Posts
- 3
*Help needed with drum build, from someone with woodworking knowledge*
Hey folks! I'm an independant drum builder, and have a question for someone that is a tad more "tool-savvy" than I am. I'm wanting to cut down on all my manual sanding time, and make my life a bit easier. I have seen some folks set up wood lathe machines to mount drums on, and spin them for quick and easy sanding, staining, and so on. Nobody ever explains how to actually mount the shell onto the lathe, and give any info on whether or not a special jig needs to be made. Also, I believe to spin a 22" or larger drum, I believe only certain lathes will accommodate for this. If anyone can help me out with some info, I'd be ETERNALLY grateful! Cheers!
-
22nd August 2014 12:53 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd August 2014, 10:30 AM #2
Hmm. Yes. A special jig might need to be made. And a bowl lathe for such big diameters. Can you narrow down your location? I am in Melbourne.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
22nd August 2014, 02:56 PM #3
A conical head and tail stock would possibly work, but you'll need a lathe with a big swing. I'm not familiar with bowl lathes but one of them might work.
You'd be sanding across the grain though, rather than with it.
-
22nd August 2014, 03:52 PM #4Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
A while back one of our members turned a Djembe and posted a WIP on how he did it. This is the link to his WIP and may be of interest to you as to how it was help on a lathe.
As you can see it is not too easy and not a job for a beginner, alsothe initial setup costs just to make sanding easy doesn't make sense.
Peter.
-
23rd August 2014, 01:39 PM #5
Why a lathe? Why not just a slow running grinder with forms of varying width? If the grinder runs too quickly you may need to use belts etc to get a slow running speed. You need to remember that the velocity of the outside of the rim can be many metres per second.
Maybe rims from old minis or kids bikes could be adapted."We must never become callous. When we experience the conflicts ever more deeply we are living in truth. The quiet conscience is an invention of the devil." - Albert Schweizer
My blog. http://theupanddownblog.blogspot.com
-
23rd August 2014, 07:44 PM #6part time wood mangler and ukulele player
- Join Date
- Mar 2010
- Location
- Canberra
- Posts
- 115
It really depends on what type of drum you are making and what level of finish you are after. Some small trim planes can be faster and give a better finish than sanding. On the other hand I know of fewer finer ways to turn wood into sawdust than an angle grinder with a sanding disc on it. A lazy Susan bearing an spin it with the angle grinder running against it.
-
23rd August 2014, 10:21 PM #7
Ah . Lazy susan might work. Sander just on a drill. Grinder a bit brutal. I sand bowl with a drill with the lathe stopped and the pressure of the sander spins it around too. STill need a way to hold it. Perhaps even just a cut out circle of thick mdr to fit inside the rim.
anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
-
24th August 2014, 11:02 AM #8part time wood mangler and ukulele player
- Join Date
- Mar 2010
- Location
- Canberra
- Posts
- 115
A grinder with a sanding disc is not a bit brutal. It is a lot brutal.
For smoothing down this little beauty can not be faulted for the price
http://m.supercheapauto.com.au/Produ...ne-Mini/321712
Masters have an identical looking one. I bought the 14.95 kobalt block plane as well and had to pull it apart to get the adjusting screw seated properly but now it works great.
https://www.masters.com.au/
The Stanley surform rasps also come in handy sizes for smoothing down around curves.
http://www.stanleytools.com/default....3174%3B+Shaver
-
24th August 2014, 01:33 PM #9Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I wouldn't bother pursuing any further options any more as the original poster (ozcan) hasn't been on anymore after having made his original request. Cannot understand how he can be helped if he doesn't even look at the replies.
Peter.
-
24th August 2014, 09:11 PM #10
Similar Threads
-
Help needed with Refurbing Cricket Bats- Advice on Drum Sander + Buffer needed
By Melbourne in forum WOODWORK - GENERALReplies: 23Last Post: 17th April 2014, 10:22 PM -
Another Boring DRUM SANDER BUILD ....
By bevins in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 38Last Post: 16th April 2013, 08:20 PM -
URGENT KNOWLEDGE NEEDED - Mountain Ash milling
By FenceFurniture in forum SMALL TIMBER MILLINGReplies: 10Last Post: 1st October 2011, 05:21 PM -
Drum Sander Needed To Be Used!
By PEDRAS in forum HAND TOOLS - POWEREDReplies: 4Last Post: 7th July 2011, 02:07 AM -
Test your woodworking knowledge
By Dengue in forum WOODWORK - GENERALReplies: 12Last Post: 2nd October 2010, 10:32 AM