Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: light guage mesh
-
22nd January 2009, 12:40 PM #1
light guage mesh
i need some mesh as a ventilation grill for the rear of a valve amp
maybe 2mm aperture
any ideas where i might get som??ray c
dunno what's more fun, buyin' the tools or usin' em'
-
22nd January 2009 12:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd January 2009, 03:19 PM #2Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Posts
- 62
what about bronze or aluminium flywire?
-
22nd January 2009, 03:29 PM #3
a bit too light
it needs to afford a reasonable amount of mechanical protectionray c
dunno what's more fun, buyin' the tools or usin' em'
-
22nd January 2009, 03:56 PM #4Member
- Join Date
- Jun 2004
- Location
- Melbourne
- Posts
- 62
in that case, try a security door supplier for an offcut...
-
23rd January 2009, 09:54 AM #5
-
23rd January 2009, 01:54 PM #6
What size piece do you need Ray?
Jim
-
23rd January 2009, 02:16 PM #7
not sure exactly but 300mm x 150mm would prolly do it
ray c
dunno what's more fun, buyin' the tools or usin' em'
-
23rd January 2009, 05:20 PM #8
Hi Ray.
There is a place up here in Sydney called "Metal Mesh" Ph (02) 94863900.
They will have it.(See Pic)
If they wont send it down to you let me know.
Regards
Greg
-
23rd January 2009, 06:09 PM #9
nice lookin cab there man
btw what is the aperture of that mesh?ray c
dunno what's more fun, buyin' the tools or usin' em'
-
23rd January 2009, 08:16 PM #10
Thanks Ray
I reckon the mesh is about 3-4 mm. I will check over the w/e.
You could also try to get hold of some vents they use in brickwork.
OR I found this http://www.metalmesh.com.au/cfm/index.cfm
OR http://www.wiremesh.com.au/about.asp
Greg
-
23rd January 2009, 10:09 PM #11
-
23rd January 2009, 11:42 PM #12
I have a piece of Stainless security mess at 148mm by 2m. The openings are about 1.8mm x 1.8mm and the wire is about 0.7mm. It is black powder coated I think ( some other very tough black coating). Would be happy to cut you 300mm and post it. Just send me the post cost if you want it.
Jim
-
24th January 2009, 01:07 AM #13
Similar Threads
-
after some light mesh - where from
By old_picker in forum METALWORK FORUMReplies: 3Last Post: 22nd January 2009, 09:07 PM -
Metal Mesh
By BUNTA in forum WOODWORK - GENERALReplies: 16Last Post: 14th August 2007, 10:14 AM -
Micro Mesh
By bdar in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 8th April 2006, 12:12 PM