Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
29th August 2006, 01:12 AM #16
I've used the Timbermate fillers several times, both as a filler and to repair little errors with the router bit. On it's own it's like dry scone dough and doesn't want to stick to anything, but thinned a little bit with water it's great. For filler I brush it on and level off the excess, as suggested by old_picker. For filling gaps I thin it a bit more and mix in some sanding dust from the same timber. As a gap filler it's best to build up a layer at a time, giving the last lot time to dry off a bit. I've found in all cases giving the timber a light rub with a damp rag seems to help it bond. It sands like Spakfilla... very friendly stuff.
Rob
-
29th August 2006 01:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th August 2006, 08:24 PM #17Originally Posted by Paul B
The secret is not to sand it back too aggressively. Take it nice and easy with finish paper say 320.ray c
dunno what's more fun, buyin' the tools or usin' em'