20th Mar 2019, 12:42 PM #1New Member
- Join Date
- Feb 2010
Speaker cabinet advice (Tritrix build)
I have put down the hard earned on a speaker kit but this didn't include the cabinets. I wanted a specific look to the cabinets and plan to build them soon. Trouble is all the research I have done doesn't tell me if I am barking up the wrong tree so am now asking the question here.
My idea is to build the cabinets out of cut out ply rings laminated together with a striped cherry/maple baffle. The intricate details I haven't worked on yet but am sure there is nothing that can't be overcome. As a quick idea of what I am talking about I found a youtube video where the guy made a side table much the same way I want to execute these speakers. Just imagine there is front and rear baffles on the following photo.
The speakers I will be building are the Tritrix Sealed of which there are thousands built around the globe.
I hope to be able to find some Baltic Birch somewhere in SE Queensland to make them but just want to make sure this idea is OK. Main thing I am worried about is being edge grain ply that I might come across an unseen void in the ply which could cause troubles with air exiting out the void causing problems.
Building the cabinets won't be an issue as I have all the tools and equipment needed, just not the experience in building cabinets from ply. I know MDF is the preferred medium but I hate the stuff with a passion.
I hope someone on here has the experience to say yes or no or what a stupid idea.
20th Mar 2019 12:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
21st May 2019, 05:57 AM #2
I loathe MDF too Noel but there's a good reason its used in speaker cabinet construction - it has no grain variation to interfere with the sound waves produced by your speakers. I recently got rid of a pair of old stereo speakers. The cones were 18" in diameter (they were monstrously heavy) and originally cost the previous owner a motza - he had them matched to a high end hi-fi system made in Switzerland - the cabinets were made of? ... veneered chipboard (no MDF around in those days).
Make them from MDF (outside the workshop with a good dust mask on) and have a go at using real timber veneer (thinnest you can get).
Good luck with it all mate.If you never made a mistake, you never made anything!
21st May 2019, 08:08 PM #3Novice
- Join Date
- Apr 2013
- Mornington Peninsula
I say go for it. End grain ply looks awesome, and I donít see how you can do this with MDF and veneer.
Coat the inside with epoxy (brush it on) to seal it and make it airtight.
The audiophiles will insist that it has to be this or that, but unless your sitting in a dedicated listing space in exactly the right position, I say make sure it looks great. And original.
My only concern is the cost of good ply and the wasted material.
Sent from my iPad using Tapatalk
By Tenson in forum WOODWORK - GENERALReplies: 7Last Post: 25th Oct 2013, 11:44 PM
By Dust Mite in forum FINISHINGReplies: 0Last Post: 29th May 2012, 09:23 AM
By Dust Mite in forum HI FI EQUIPMENTReplies: 3Last Post: 14th Apr 2012, 03:54 PM
By supersonikk in forum HI FI EQUIPMENTReplies: 14Last Post: 28th Oct 2007, 07:15 AM
By old_picker in forum MUSICAL INSTRUMENTSReplies: 1Last Post: 15th Oct 2007, 08:21 PM