My new tape measure has incremental diamond shaped markers all along the tape. The first marker is at approx 490mm, the second at approx 980mm etc. I've not seen this before.
Anyone know what these marks are for?
Attachment 124766
Printable View
My new tape measure has incremental diamond shaped markers all along the tape. The first marker is at approx 490mm, the second at approx 980mm etc. I've not seen this before.
Anyone know what these marks are for?
Attachment 124766
I await such reply also, but also ask why in the world does a Stanley tape easure cost over $50 for the fat max?
Stud centres/rafter centres?
That's a good thought, thanks. I'll try looking into that...
Gidday all,
Don't know about the stud / rafter / joist spacings.
stud centres are usually 450 & 600.
rafter centres are usually 600, 900 & 1200.
in residential buildings anyway, although I've been out of the game for a bit over a year.
Just had another look at the pic & the mark is at about 488mm. 450+38 thick joist/rafter.
But I still think it may be for something else.
That's a strange one. It seems to be 19 3/16", and I have Starrett DTB34-16 which exhibits the same marks. The last one is at exactly 16 ft, and works out to 10 parts, or 1.6 ft (19.2") each. That model is no longer produced, so info is hard to find. My dictionary defines the cubit as 17"-22", so maybe it's for building arks.
Most of my other tapes are marked at 16" (common stud spacing here), and a combination Stanley has metric marks at 400mm increments.
In a computer magazine I once subscribed to, the editor remarked, "The nice thing about standards is that there are so many to choose from."
What brand is yours?
I'll place my bet on the cubit.:D Really.:rolleyes:
Cheers,
Joe
Get onto Stanley and ask them.
Aah, Google was my friend. This is what I found, so we can all sleep at night now :)
Secrets of Using a Tape Measure | Charles & Hudson
http://www.charlesandhudson.com/arch...sure-guide.jpg
WikiAnswers - What are the black diamond markings on a tape measure
Trivia - Numericana
Using and Maintaining a Tape Measure
Black Diamonds on Tape Measure - Triangles on Tape Measure - Truss Layouts - asktooltalk.com
Uncanny that 1.62 is so close to the "golden ratio" of 1.618, and it all could be a chicken or egg question. IIRC, sqrt(5) is part of that computation. I'll try to remember this when I next visit my attic.
Cheers,
Joe
It's no wonder the GMC 7.5M powered tape didn't sell well at $89, but I managed to pick up a bunch of them for $14 ea. Now that was a bargain as all the handymen in the family now have no reason to borrow mine!