Looking for photos, dimensions, details of what the fence is like for a Pauslcall Sander/Linisher
So far this is the best image I’ve been able to come up with.
https://uploads.tapatalk-cdn.com/201...aa7863a571.jpg
Printable View
Looking for photos, dimensions, details of what the fence is like for a Pauslcall Sander/Linisher
So far this is the best image I’ve been able to come up with.
https://uploads.tapatalk-cdn.com/201...aa7863a571.jpg
I've recently acquired something very similar if not identical. I will post some pics when I get home tomorrow.
Here's the promised photos.
A piece of heavy angle iron with a shim under the bolts would work ok.
Attachment 450985Attachment 450984Attachment 450983Attachment 450982
That’s great thanks. I have some heavy angle I can cut down and a spacer shouldn’t be an issue.
Mine doesn’t have the disc sander part of it ever did.
The disc is just a faceplate that slides over the other end of the shaft. Wouldn't be hard to make as long as you could weld square.
The disc table on mine is home made(not by me) but seems to work ok. Just a bit of plate that slides in and out on a welded frame. I had to modify1 it to get it to sit square.
1 big thumb detector and a bit of brute force.