Originally Posted by
seafurymike
I see they are 8 wire units, not sure what current rating you can use on the G251's with the recommended wiring on the web site for the BIPOLAR PARALLEL setup. I expect they would draw more than the supplied current figure of 2.8amps as this would have to be rated at the 77Vdc setting?? Is this correct guys, given he would use 48vdc he would either drop the power or run more current for the same power. Check with Chris that the match is fine and he would back the combination as a package before purchase.
I have a 1.5kw water cooled unit and it runs so quietly, the cutter will be most of the noise.
PS Chris is a great bloke, you should have no issues with dealing with him