Wiring Chinese Spindles and VFD's
Hi Guys - I guess this is particularly addressed to either Rod or greg, but any suggestions would be very welcome.
I just received my Chinese air-cooled spindle and VFD, but ithey came with no paperwork or any sort of wiring diagram/guide sheet.
I have enclosed a couple of photos so people can see what they look like - pretty standard I think.
The specs are;
* Spindle - air-cooled 1.5kw - 65mm x 200mm - 220v x 1.5kw - 8a 400hz 24000rpm
* VFD -made by Huanyang - model HY01D523B - 220v 1.5kw.
The fitting at the top of the spindle has three wires ( I have checked - all three are connected to the spindle, but not sure which one is the earth).
Any help with wiring diagrams, suggestions, etc much appreciated.
Probably the most confusing thing is the setup under the VFD which has nine connectors, as follows
1 2 3 4 5 6 7 8 9
R S T P+ PR U V W (Chinese hieroglyphic)
Cheers in advance
Noel