Search:

Sorry, The only plan I had was a vivid Imagination, I did however make it all out of Gal, so some time later and being stored outdoors still like new,
Mongrel to weld that thin gal with an arc...

Been a while, but I forgot to post up some pix, so here they are, It has been going well with fairly heavy loads over the top, and 6 meter lengths now no problem, thank's for everyones suggestions.

Your making progress, I've only just welded up the frame, It's a pita workin' with an arc welder, especially when it's gal, havn't the luxury of a mig, next will be the mesh, 75 x 50 x 4mil should...

Some good tips there, thank you guy's, I have some experimenting to do as to the actual height, the overhang is basically so as I can cart 6m lengths without sticking out the back too far, with the...

I need to make a cage for a 9 x 5 trailer, around a meter high, I need it strong enough to load timber on top which will overlap my ute, timber weight approx >300 kilo, can someone in the know...

I'm with harry on the white, however as long as they sound ok....
Was toying with the idea of using these drivers myself, very reasonably
priced for what you get.
Do you have a link to the thread...

Anyone know what's happened to this mob :
http://www.discountwelding.com.au/
I use to buy all my rods from them at very reasonable
prices, Now gone?
Sign of the times perhaps, Is there anyone...

Hey caveman how bout a followup?, I'm considering one of these chinese
welders as well, any good?

Had a roof done about 2.5 years ago by a mob called roofshield, still wearing very well, was pleased with the preparation and final finish, just recently noticed some stains in the ceiling near the...

Hmmm... Over here in vic the standard rail/plinth size is 5.4mtrs giving you a post spacing of 2.7mtrs, I automatically assumed that this would be the norm universally but not so, we do have a...

Sorry dayvo, I'm a little late and you have obviously bought one, but for the rest of yous, If your not in an all fired up hurry just wait a bit longer, Although I've dropped out of the industry now...

A half decent mower should start within three pulls of the cord, I have a 1974 victa mustang 2-stroke still starts within three pulls, all I have ever done to it is replace the plug (about 3 times)...

There is a fine line between being proud and being poor, I know a fencer who was exactly the same, would not budge a dollar from his quotes, out of every 12 quotes he would only get one job, and...

Has anyone used an aussie product called "Liquid Hammer", I have used acid based cleaners in the past but found that upon some applications it does more harm than good, so this product seems to fit...

They r not hard wired anymore, havn't been for many years, all through an iso switch, another reason why anyone not in the game doesn't know the current regs, which I might add are not freely...

Caution, plumbing commision doesn't take kindly to diy installs, or even genuine installs by qualified fridgies who dont comply with the rules, you see the problem lays with the compliance...

Could be your new thermocouple, was it doing the same with the old one?
Is the thermo close enough to the flame?
Could be the control valve itself although rare.

There is one described in detail in the (Australian Handyman magazine)
May 2006' edition, you might be able back order it.
http://www.thefamilyhandyman.com.au/

Very much sounds like an all in one shower cubicle, which is not checked into the studs but stands alone, a pix would help.

I rang a guy up to come and cap off a connection on a wall oven as I wanted to replace it with an electric model, well a few hours later a chap knocks on the door, Hmmm must be the apprentice ( very...

55 litre doesn't qualify for off-peak tarif, minimum is 150ltrs depending on which state your in, should be hard wired with it's own circuit and fuse, the problem with plugging it in to a powerpoint...

Here's one you could do on the cheap, by hanging reed switches on the transmitter instead of the push button switches. although you would need someone handy with a soldering iron....

I would be wary about using the power point at all, lighting and power wiring should never be combined, this diy has done a big boo boo, who knows whether he has used lighting cable to run to the...

Hey guys every time I mail aranmaracoustics they are out of stock on the 12" shiva, by the way their email service aint workin' anymore, anyone know of an alternate supplier?

Assuming a single phase induction motor, These are generally rated at 400VAC , note it is important to choose the correct value for the motor otherwise the starting torque of the motor will change,...

Jason those flashes are generally harmless, If you have an Inductive load attached to the point then Interrupting the current by switching off the power point will cause a high voltage flashback...

I'd get rid of them, talk about efficiency, they havn't any, money going out the window, half your power usage on those lights is wasted, If you have cheap asian transformers then they can develop...

Research has shown that cheap and not so cheap mixer taps can spring a leak if the pressure is too great, many manufacturers have warnings on their products to fit suppressors If the water pressure...

Thanks for the response guy's, armed with the Information provided I can now confidently mount an aggressive approach to the removal of these posts, they dont stand a chance.:D
Cheers.

You sure about that mick?, I do know that you have to check your water pressure and if it exceeds a particular amount to fit restricters, but stop cocks?

I thought it would have been covered before, did a search but to no avail, I'm about to embark on another paling fence replacement, now the previous one I'd done was next to a vacant block and to...

They can be difficult to settle in to their new home, I planted one here and it died, there and it died , over there and it died, I thought one last try over there and it kicked off, why? biik, yet...

Try this mob, got some off em about 5 years ago and at the time they were very reasonably priced, could be different now though.
http://www.directpickets.com.au/
Failing that how about Tile...

la Huerta I have heard the jv60's in action and was very Impressed by their performance, however I did not have the opportunity to hear them at high volume, from memory they had a fairly linear...

They would be worth a nice dollar too niki, here in australia we dont see many russian machines, power tools etc, many many german, american, chinese, type mix with quality from pretty average to...

Good job niki, you done well, and to quote another quote " It might look funny, but It makes me all my money":)
Cheers.

Anyone got the notion that they might want give it a go in the near future should have a look at the link below, go to the clearance bin, Only wish they had these prices when I was doing...

Hmmm "Wallwart" you learn something every day, funny name for a plugpack though.:)

Mmmmm, makes your mouth water.

And I know it as "super screen" generally goes behind diamond type grills,see the link below, you still need flywire though cause the bugs still get through....

Very messy, and you will need a lot of the stuff to do the whole house ,as well as a lot of patience, how about using a coarse grade sand paper followed by a medium grain and then apply a texture...

There is a thermostat on the hws, generally near where the main electric cable enters the hws, yes you are supposed to be an authorized person to get a small screwdriver and back off the thermostat,...

Generally the cistern is the majority cost of a toilet system, so you might be better off buying a married couple.:)

Most definitely tile first, I've done it both ways and learnt the hard way, If you lay those tiles evenly it's a piece of cake, I think the scales are starting to lean to this method, the other way...

Had some made up recently for non standard windows (expensive), When I Initially went to the factory to view available stain colors I had a bit of a wander about the shop and noticed that most...

There is a difference to a bog standard bath and a shower over bath, the shower over has an anti slip base with a sharp recess at the shower end, without that recess you would tend to stand too far...

luxor have you considered evaporative cooling?, they are not as efficient as refrigerant but dont cost the earth to run either, pretty useless on hot humid,muggy days though, thats why their not...

Just to recap on previous post I did finally get to it and found that the tank was indeed contaminated with a combination of sludge, rust etc, far too much to attemp a ressurection, so I ripped it...

Apples aint apples so they say, hop into bunnies and have a look at westmix,
1..Boxed you put it together $200 2.2cm
2..already assembled $500 2.2cm

Difference: one is made in china, the other...

Barry is that how it ends?:eek:
do the infidels win?:mad:
or have you something else up your sleeve?:rolleyes: