Search:

I will replace it , when you can't even try the 6mm bits because they won't fit in router collette its a waste of time anyway , i was hoping to get advice on changing winding handle insert . Trevor...

I bought a JOF001 TRITON ROUTER , to fix a winding handle problem on the a TRITON TWX7RT001 ROUTER TABLE MODULE . I'v tried it a few times but the 6mm bit holder won't work at all even with new...

I still havn't sorted the winding handle , i thought i'd sorted it today , a video i watched showed me i needed a different winding handle number insert .They had number insert 1 i have since...

The locking lever was open the router itself is as far down as you can get it is open , the winding handle hasn't moved or connected with the router bit holder any time at all . Trevor .

I'm in my sixties so the less time i spend on my knees the better .

I live in the Northeast of England Durham Tyne and Wear area , does anybody know any ( phone numbers anything at all that can help me sorting this problem ) . I don't mind paying , as long as i get...

Nice to know its still not working though .

With the locking lever open the router itself is as far down as you can get , i take it the winding handle should still work from there . Trevor .

Chrism3 , Its the winding handle , that i'v been trying to use .

Chief Tiff , the Triton 265709 TWX7RT001 Router Table Module , was already set up . My main question is was it set up properly , thats why the winding handle ain't working and the locking handle is...

Hodgo , Bertr , i didn't realise you ciould get router tables with winding handles on the top ,i had ancient Elu . I'm trying to figure out why the winding handle isn't lowing or raising the router...

It's the Triton 265709 TWX7RT001 Router Table Module , that i'm trying to set up to find out if the triton router is set correctly in that .Try these photos from the end 527664527665

Afternoon all , i bought a triton router years ago . I had an Elu router which broke in dec last year , i don,t too much and it has not been used ( product wise ). Searching online i came to a Triton...

Evening all ,I thought your site had closed down , or changed . When searching for it i got Australian woodwork , which sold jewellery boxes etc . I thought that was you lot .

There are some fantastic looking boxes on this forum .

I will stick with the SIP model , they are both very similar in working operations . The SIP have a larger motor , so I will plump for that .

P.W.H. , Do you think I should use the FOX F50-842 .

BobL , when I get it , it will probably be the last speck of sawdust seen in this street .

Nothing ventured n wotnot , I think I will get this model .

The Sip model says
Powerful Induction motor , will that be quiet . Or will I not know until I buy it .

Jet , https://www.toolsandtimber.co.uk/jet-dc1100a-extractor-210045

Axminster ,...

It works in windows too , easy when you know how . I will have to make a note and leave it somewhere .

Link , https://www.ebay.co.uk/itm/SIP-01954-3hp-WORKSHOP-DUST-EXTRACTOR-woodwork-sawdust-chip-collector/182337984045?epid=2254338908&hash=item2a7430d62d:g:3NoAAMXQgb1RIUqV

New extractor , http://SIP 01954 3hp WORKSHOP DUST EXTRACTOR woodwork sawdust chip collector , i wrote this as I was trying to put a link on the webpage .

BobL , you would think improvements are likely . Every where try's to improve Table saw manufacturers , all electrical items bought for the house , there are always trying to improve and update . You...

BobL I am planning on using the D/C inside an extension , too be honest any I buy has to be a thousand times better than what I have now .

[QUOTE=QC Inspector;2081091]Those two are basically the same machine with 11" impellers. The Charnwood has an optional cartridge that would be better than the bags. You could get a better bag like...

2 Photos with the Fox dimensions on where it lists down to 35 microns .433726433727

2 Photos with the dimensions on for the Fox extractor .433724433725

I have picked another dust extractor , one I looked at before .Its a Fox F50-842 . What worries me is where it states Filtration down to 35 microns ( the first person BobL said it had 5 microns ) ....

Hence the need to educate ones self. That to me only comes with using different tool's , and year's of experience . I will have to go now , the big dust extractor search will have to wait another day...

QC Inspector , as I said all idea's are welcome . What I don't understand is on one of those photo's I uploaded , it said Best on test . The Woodworker , you would think they know what they're...

QC Inspector , all suggestions are welcome . That's why I asked on this site , I was hoping for some models . I know very little about most things so any help I get is welcome .

I'm going to buy the Scheppach Woova 3.0 Dust Extractor .433550433551

Evnin all , are any of these any good . 433472433473433474 I looked at some Axminster ones but they were far too expensive for me .

Evnin all , are any of these any good .433470433471433469

BobL , I don't have any
sensitivity to wood dust . Could someone recommend a suitable Dust extractor , it will be the end of April before they get the
Charnwood Dust Extractor – W691 back in...

Mornin all , I picked a dust extractor out its a
Charnwood Dust Extractor – W691 , but everyone in the country must have at least 2 of them . Every supplier I contact is out of stock ( exept the...

I was in a bit of a hurry this morning , there is also an 8ft x 2ft workbench down one side of the room . I decided to build the 8ft x 4ft bench to give me extra workspace , I can remove the smaller...

BobL , the space is an extension I had built a while ago . It is 21ft long x 8ft wide x 8ft high . There is 2 windows in it so plenty of light , There is a garage at the other end with probably the...

Afternoon all , I have decided to invest in a Dust Extractor . On one review which was the best value for money I got SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector . This was listed on...

[QUOTE=Bob38S;1738608]Are you Sam/Spoore86??

Have checked my end and my sent box tells me all went OK. It was sent as 4 smallish emails [to avoid overloading mailboxes] - I sent the manual as a...

hi Bob , I got your email but did'nt notice anything added , sorry .

I have a DW 1751 RAS . I don't have the operating manual for , the crosscut lenth on this model is about 600mm .

yes i should have removed the guidebush first . thanks all :)

mornin all , why not break summit of his , like his skull with a nice long piece of 4" x 2" . that might be a good remedy next time he'll be busting someone else's gear .:U

thanks all , i did put the bit through the guidebush before as you are saying . but when i came to take it back out is when the trouble started . i had to take one of the clear plastic dust collecter...

thanks all , i can fit the bit ok , it's when i fit the guidebush the problem starts , the bit won't go through the 10mm width of the guidebush hole .it would be better if i could fit the bit after i...

mornin all , got a brand spankin new triton 1400w router yesterday . was going to try to do some dovetail cuts on a cheepy jig i have . i have aligned the router up using the guide bush plate and the...