Search:

Is the apprenticeship based in Bris, Gold or Sunshine Coast?

Am I missing something?
Individually they cost $142.50 & $199.50 or $342.00 total. As a set they are $399.50.
(insert quote by Pauline Hanson)

Gday John,
A mate of mine recently picked up a used working above ground spa about the same dimensions for $150. Would be easy to reclad it & no structural or water proofing problems.
Also pool...

:2tsup:

But the instructions say to place the brick on a concrete base which is 400mm below the surface. Doesn't seem logical. :doh:

Could you zip tie the trigger in the on position & plug the router to an inline switch that you use for on/off?

Not me (yet), but they removed around $3,500 a day in scrap metal over 3 weeks from my late uncles place.

Have a look on Google Earth, 10 Douglas Pde, Croydon Vic. The rear boundary is where the...

pm sent

Check your grammar and punctuation before posting.
You'll get a better response if people can understand your question.

welCome two, the Fourum.

The Hitachi can be pushed up against the wall. You have the option to have the rails locked forward with the saw sliding or the saw locked to the rails with the rails sliding. I picked one up from...

I went with the Hitachi C12RSH. :D

No doubt about it, it must be moved downstairs. There is a law somewhere that states no washing machines within 10m of a homebrew setup. Honest.

Carbatec website says the ub-3100eck has a 200mm inlet with reduction to 100mm, so I'd assume this reducer could be removed & just use the 8" inlet.

..if I'm sending this thread off on a tangent let me know.

So if we take the ducting out of the equation & look solely at the extractor/cyclone, in the Carbatec Catalogue for example, they have 2...

mostly interested in a 12" scms. I would have thought the basic machines are the same except for our 240v requirement. I'm interested to read about the pros & cons so incase there is something I...

....from what's been mentioned previously, would it be fair to ignore the manufactures spec & assume that the greater the filter area the greater the cfm of the dusty?

Hi Pac Man,
Yep, thats the one, but can we buy it in Aus or is it overseas only?


....gonna plug in the Atari 2600 this weekend.

I can't find any local newsagent that stocks this.
So I'm wondering where other Forumites get their copy from.

Cheers,
Paul

One of the reasons I bought it was because the kerf plate will be cut by the saw to be the width of the blade. On just about every other compound mitre saw there is a ten millimetre gap for the...

United Tools have the Hitachi for $349 with a portable stand. You may have to do a Google search for a dealer in your area.

Is this what you are looking for?

https://www.woodworkforums.com/f223/roll-post-shelving-139201/

I will need to find out where the Narrow Leaf is from.

I'm trying to get some timber for a dining table to match our veneered Tas BW kitchen. So do I need to find out what region the veneer came...

Is there any noticable difference between these timbers in regards to color & grain?
Cheers,
Paul

Is 25mm undressed thick enough to use for a table top 2.4m long x 1.0m wide? My other concern is how table legs will look made from laminated 25mm sections.

Thanks all for the replies & link, got exactly the info I needed.

I've been to three different tool shops and not one staff mention about different blades for table saws & mitre saws. No wonder...

I'm in the market for a new scms and had a thought to get one with the same size 30mm arbor on my table saw so that blades are interchangeable. Any thoughts or experience with using bushes on blades?...

Yes, I believe around 10 years old

I've only seen the timber in there bundled packs.

Are there specific questions that I should be asking?
Cheers,
Paul

approx $1000 per cube for 25mm thick & $2000 per cube for 50mm thick. I'm told the quality is the same for both.

G'day Greg,
Definetly exactly double the price for the same volume. I thought it was odd hence why I started this thread.

Good question. Maybe someone else could shed some light.

I was told it is all furniture grade. Same timber, just different thickness boards.

I have an opportunity to purchase some 25mm thick Tasmanian Blackwood at a very good price. However the same supplier has 50mm thick Tas BW for double the price of 25mm thick per cubic metre. Is this...

Thanks for the info about rot fungus, I think I'll keep an eye out for a more suitable timber. It would have looked flash though.

I've got plenty of powder coated metal shelving I'm currently selling.
Here's the link https://www.woodworkforums.com/f223/roll-post-shelving-139201/

I have an opportunity to purchase approx 42m2 of 25mm thick Tas BW for $1100. I have an roofed patio almost the same size. I have a Tas BW veneered kitchen that the patio opens up from with 6m...

Yeah, post a pic pls.

Cutting capacity for the Mak non slide is 98x153 @ 90 deg, the Hitachi scms is 107x312 & the Milwaukie scms is 115x342.
There is only a max price difference of $75 between them so that takes price...

In an effort to control the amount of dust being thrown around by my current Bosch 10" SCMS, I've decided I need to build a dust box behind it & connect it to the dusty. My problem is the dust box...

As long as it does a reasonable job of what it's supposed to do, I think it's pretty good buying at $21. Plus I save about $24.63 in fuel not having to drive the 5Km to Bunnies.

$17 seems a bit rich for postage. I'd be much happier paying $21 for the blade with free postage.:D

Are their shipping rates reasonable?
I've placed an order & received an invoice for $3.85 with shipping $0.00(TBA).

Is it 96 bucks for postage or a case of you get what you pay for?

Can an 8" blade safely run in a 10" saw?
$4 for a saw blade is bloody cheap.
Thanks for the heads up.

:whs:

How old is it? & What condition is it in compared a new one?
Cheers,
Paul

I think I saw Glenfords recently advertising a WIA for $99, but I could be mistaken.

I'm glad I asked the question before actually doing it, I got as far as reversing the blade but thought I should ask before cutting.

Is it Trade Tools Direct that you're thinking of?

Thanks for the link China. I'll see if I can source one locally first but this gives me a good starting point with price.

Cheers,
Paul

Thanks all for the quick replies.

Subconciously I think I knew it wasn't a good idea hence my question.
This is a spare cheap SCMS that has been sitting unused for over 12 months that I want to...