Search:

The 90/35 is simply because we over ordered at the carpentry stage,

The 20mm gap is a nice to know, i would have left only 10 mm

Yes, it is MGP10 blue and thanks for the reminder about...

The epoxy was a nice to have, and for circa $400 (only for the ground floor)

The plastic sheet i thought was required by the standard, although it might be redundant if we are coating the slab,...

It does have a plastic sheet underneat the slab, the section with the 50mm variance was due to the footings being too high, done by a different contractor, so who do i really chase.

The trouble...

I have bought the paslode floor master and the 38mm staples for T&g secret nailing.

I have done this before, but previously was done over 50 yr old house where i relined over the existing floor....

Do i just go to 50mm? or more is needed

thanks

Harender

May i please get some advice from the guru's out there.

PLanning to use pine 90/35 as battens to level the concrete and install Blackbutt T&G (85/19) using 38mm nails.

The slab will have a...

HI People,

Building a new house, and the mrs wants soid flooring.

Any pointers on where i can get about 400 sqm of 80/19 Blackbutt T&G floor boards.

Retail prices in Sydney are...

sold pending pick up

I filled the trailer to move it into storage, but too tired to go through with it.

Free for the lot, if you can come and pick it up.

I cant help load though as have tested positive for covid.
...

LOoks like we will be selling the place, and scrambling to move 15 years worth of accumulations.

One of those were slabs that i purchased, hoping to build coffee tables, beds, amongst other...

Hi People,

Just wondering if any of you have tried to get a generic paddle to use with the festool mixer.

I got one of ebay without the paddle and am wondering if i can get a paddle of bunnings...

Router Table Only, No fence

Pick up onlt from Rosehill, NSW 2142

$100 ono

Inspection welcome

Used, but in fair condition469045469045

This has now been sold to Dave, thanks Harender

Hi People,

I have a brand new CT 36 AC unit for sale.
It came as part of the Planex set, already have another one and this is surplus.

New on retails for $1595.
This is new, as in the box...

I have ended up with two Festool CT36 Units, and need only one.

The first one is around 4 years old (out of warranty) but working perfectly fine.
This one comes with 3 extra bags (new and unused)...

Thanks, for your help, just went and got a primer from bunnings and working on a sample piece right now.
plan has changed from enamel based to acrylic based, hoping i will be able to apply a polly...

I thought this question was better suited to finishing and hence posting it here and not in the paint section.
I am building a reading desk for the girls, and have been requested to do it in Pink,...

HI David, do you mind sharing the details of where you are buying it from.
I have the rotary axis on my shopping list for some time
Thanks
Harender

Brilliant, this helps a lot, appreciate the assistance from both of you,

now for some trying out on scrap pieces and away we go, swmbo has given me a time period of 4 weeks to complete this, if...

just to confirm, sand, seal, paint (enamel paint) and then coat with acrylic lacquer.

I normally get my stains and lacquers from BC Coatings, and they have this, is it the same product,
...

[ I have made a few jobs using MDF and used normal house Turps based enamel. It worked very well. The only draw back is that the enamel is slower to flash off than the Lacquer.[/QUOTE]

Thanks, is...

This may be a stupid question but I think i have to ask it as google is not taking me anywhere.
Here is the background to the question first.
I have been commissioned to build a couple of beds for...

I am in Rosehill, Sydney and will be happy to help you out if nothing else closer comes up.

i have a ton of scrap lying around so we can do a test cut before we put the actual piece in there also....

Hi All,

The new contact no for Chris is 0416 692 434.
He is still sorting through the issues that he had and has not been able to get himself online for the past few weeks.
Hopefully, in the...

Hoping he is ok and is able to come back online soon,

Harender

Hi There,

Does anybody have the new contact details for Chris,
His phone has been diconnected and i don't have any forwarding address or contact number to try and ring him.
I have bought and...

i did something similar a few years ago, and i had a cheap spray gun at that time and the results were not good.
Ever since then i have avoided such a thing and never had to face the problem, but i...

I have a cnc machine and can help with this one.
But will need more details, and also, being a hobbyist, time is also another factor as I wont be able to turn it around quickly.
PM me your details...

Sorry should have Mentioned orders Over $150 they give free delivery
I am in Rosehill about 15 km from them not sure if they will offer that interstate but no harm in asking
Their Rep Peter is a...

Seems like most of the people on the forum are not aware of these guys.

I buy most of my lacquer (BC 514), sealer (BC 512) and stains from them and they have worked a treat for me.

I have...

I bought mine from Damencnc.com and bought both the 800 and 1050 along with extra spares as i was tired of replacing the Bosch router.
The plug was also similar to the Indian specification so...

It was a 2 round pin plug the 850 came with cable attached and the 1050 came with a detachable cable with the same plug end I had to buy an adapter for it I got that for $10 from jaycar

Sent from...

301869301870301871301872

Sent from my GT-N7105 using Tapatalk

have uploaded the zip file as it did not let me load the crv file.

This was done using vcarve pro v5.5

hope this helps and happy to answer any questions that you may have.

thanks

harender

301814

Sent from my GT-N7105 using Tapatalk

Here is the final cut piece will swap it over tomorrow and have more pics

Sent from my GT-N7105 using Tapatalk

Thanks Rod greatly appreciated will start my build shortly so your posts are a great help thanks Harender

Sent from my GT-N7105 using Tapatalk

I just made this over the weekend on UHMHDPE,
Will have some photos of before and after over the long weekend as have not replaced the spindles yet.
I figured out that at exact 43.00 mm, it was...

Hi There,

May i ask where you were able to get the rotary kit from?
I have been playing up with building one for sometime now.
One of the things that i always wanted to do was turn my own...

Hi There,

I realised that a bit late, as i saw some of the links that were attached after i had typed my comments, "measure twice, cut once" should be rewritten as "read twice, type once" for...

I thought the distance changes with the change in the bit.
and this i got from a Festool rep about 3 years ago.
I have always used the 5mm bit and i get 8 mm from the bottom of the board to the...

Hi Kym,

Mind if i ask which is the best (and hopefully the cheapest) place to buy linear rails and ball screws ?

Thanks and best regards

Harender

Hi there,


I bought the CNC Shark pro (CNC Shark Pro Plus : CARBA-TEC) from carbatec about 2 years ago.
I use it to carve patterns into radiata pine panels and some of the pieces need a...

There is a company in silverwater nsw, australian air filters,

you can but the filters dircetly from them and they will cost a lot cheaper,

just google them

I have to thank you all for a whole lot of useful information that i got from this thread.

I have recently set up a workshop in my granny flat and am struggling with the issue of dust. For the...

Hi There,

How will using strom water drainage pipes (90mm diameter) from bunnings at $14 for a 2.4 meter lenght for my duct shaft affect my suction capacity from the DC 7.

I was going to set...

Hi There,

can you tell me where you are located in NSW ?

Thanks

Harender