Search:

I managed to get the stain to stick by resanding down to 120 then up to 240. I reapplied the stain and rubbed in with 400 grid wet sand paper. I left it to dry for a few days and I was able to apply...

That's the problem... too many choices!

QLD Walnut and Spotted Gum are options.

Can you suggest a dye stain?

zanlation.

Thanks Chipman. Do you repeat the stain - poly - sand process 5-6 times? So, you have stain - poly - stain - poly etc?

I am having a problem with applying an oil stain to Tasmanian Oak veneer glued onto plywood (speaker boxes). The walnut cabots oil stain comes away once I apply Danish Oil or Minwax Poly wipe...

I used a very simple method of gluing both sides of the veneer, then positioning it before applying pressure using clamps and flat plywood. Worked a treat! Much slower, but a good result.

Thanks Michael. The video looked pretty intense.

Could I overlap the veneers by 4mm, wait for the contraction of 2mm and then sand the joint?

What do you mean by a double cut?

This is my first veneering job and I have having endless problems with gaps between English Oak veneer sheets when I iron them on. This is what I a doing:

1. Roll on Titebond Original Wood Glue...