Search:

can anybody advise if a hand tool exists for punching a hole in 16mm thick timber planks? I want to make a series of holes but was trying to avoid drilling the boards. hole diameter of 35mm. The...

hi,

the other option is a pump in foam (which does not expand in the cavity) which has been used as vermin control in commercial kitchens in the past. this would need to be installed by the...

hi,

try find somebody to spray polyurethane foam directly underneath the floor boards (if access permits). that will do everything you need in one.

cheers

hi,

not sure if you are still looking for a solution, but there is a pump-in-foam product that can be retrofitted to the stud wall via a small drilled hole. The foam does not expand in the cavity...

Hi,

the foam should have no effect on the timber boards. once the walls are insulated, you should not have any sweating on the inside of the rooms as the wall surface temp should remain above dew...

the condensation is simply a matter of the warm air inside the shed being in contact with the cold roof sheet. the air in contact with the sheet cools down and is no longer able to contain the water...

contact "foamed insulations" in sydney. their melbourne applicator should be able to help you out with a pump-in foam product ideal for this application. tel: 02-9898-0751

the company that is able to supply a pump-in foam for retrofit applications just like this is Foamed Insulations Pty Ltd. Contact them on 02-9898-0751. The product is called RetroFoam and you can...