Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2005
    Location
    Gladstone, QLD
    Age
    71
    Posts
    478

    Default Table Saw mitre Sled

    Just a few wip pics of a table saw sled I built recently.
    I started off maching the timber to fit and slide into table saw slot. This timber spotted gum is very dry and I cut it oversize (about 2 mm) and let it stand for a few days to do any final movent then finished it to size to be a nice firm but sliding fit

    I purchased some 16mm MDF because it is flat and put some edging around.

    Please excse for all the photos together bt so far I have not worked out how to have them seperated with individual text but I will continue.
    The next phase was to build the 45deg support timber and I have used Derecks technique (thanks Dereck) and used one tight fitting bolt and the other one larger so as I have lateral movement for adjustment. I set it up and it works spot on. The other pieces of timber on the sle are to support the MDF just in case it wants to stray away from being flat.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

    Default

    Quote Originally Posted by Woody1 View Post
    Please excse for all the photos together bt so far I have not worked out how to have them seperated with individual text but I will continue.
    The last section in the following link shows how to place pics in the body of the text

    Posting Pictures to Your Post - Woodwork Forums
    Cheers

    DJ


    ADMIN

  4. #3
    Join Date
    Aug 2005
    Location
    Gladstone, QLD
    Age
    71
    Posts
    478

    Default

    DJ
    Many thanks

Similar Threads

  1. Table saw sled - mitre attachment
    By jmk89 in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 0
    Last Post: 14th April 2008, 11:38 AM
  2. Prototype 22.5 deg mitre sled
    By chrisb691 in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 1
    Last Post: 18th May 2006, 05:57 PM
  3. Mitre Sled
    By mjarmenta in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 23rd February 2006, 05:15 AM
  4. Mitre sled
    By Rocker in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 15
    Last Post: 12th February 2006, 03:14 PM
  5. Mitre sled for the compact table
    By Corunetes in forum TRITON / GMC
    Replies: 0
    Last Post: 11th November 2004, 09:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •