Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    2,568

    Default Best kind of steady rest

    I have looked at plans for a steady rest because the last walking stick I made kept whipping all over the place. I've seen designs with string and ones made out of metal or wood. Some are square shaped, hexagonal shaped and circular shaped. Is there a version that is considered to be the ideal because of its strength, versatility or accuracy? If you have made one of these but found them to be inadequate in some way, could you please mention why it was inadequate and what strengths the particular design you chose had.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    I like to use string rests for long, thin objects. Like walking sticks and trembleurs.

    Mainly 'cos they're quick 'n easy to move and readjust, although they do have a tendency to char the wood.

    Roller rests (the ones using wheels or bearings instead of string) generally don't close down far enough to work on really small diameter pieces, dammit. Otherwise they'd be my choice, purely to avoid the whole charring issue.

    I've made several of 'em over the years and prefer to make 'em in a circular shape from ply. The circular shape avoids any problems with racking, etc. but it generally means you have to feed the workpiece through it. Square ones often have a section that can lift out of the way to remove the item... but I don't really consider that necessary myself.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  4. #3
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    2,568

    Default

    , can you post the links to the easy steady rests that you put up before the meltdown please?

  5. #4
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    73
    Posts
    11,918

    Default

    Yep, will do it later.

  6. #5
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    73
    Posts
    11,918

  7. #6
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    4,650

    Default

    I think this is pretty much what I posted before the crash.

    Have a squint at these:

    https://www.woodworkforums.com/f8/goblet-54862/

    https://www.woodworkforums.com/f8/bir...ocedure-57866/

    https://www.woodworkforums.com/f8/fou...dy-rest-68735/

    The advantage of the last one is that it can be opened, so that the work can be remounted without losing position along the bed. It's clamped to the bed with three bolts, and re-mounting the steady is a PITA.

    I like to mount the wheels on axles supported both ends, in lieu of cantilever axles. It seems like a better support.

    I have a three-wheeler in partial development, but not yet ready for prime time.

    Cheers,
    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  8. #7
    Join Date
    Sep 2008
    Location
    Texas
    Posts
    547

    Default

    The four-wheeler is amazing Joe, as is the spherical whatchacallit (sp?)!
    Richard in Wimberley

  9. #8
    Join Date
    Nov 2004
    Location
    Eastern Suburbs Melbourne
    Posts
    2,568

    Default

    Thanks , Joe and Skew.

    I've started on the hexagonal version, have welded all the bits but am unsure how to get the arms to centre, maybe a case of trial and error because when I position them at 120 degrees they don't quite meet at the centre .

  10. #9
    Join Date
    Jun 2007
    Location
    Otautahi , Te Wa'hi Pounamu ( The Mainland) , NZ
    Age
    69
    Posts
    2,114

    Default

    Quote Originally Posted by Tiger View Post
    Thanks , Joe and Skew.

    I've started on the hexagonal version, have welded all the bits but am unsure how to get the arms to centre, maybe a case of trial and error because when I position them at 120 degrees they don't quite meet at the centre .
    Mount the unit on the lathe with a straight rod between centers , and with the wheels on , line up the arms .

Similar Threads

  1. Steady Rest & Vase/weedpot ????
    By yaryetnom in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 19th July 2009, 07:03 AM
  2. Four-Wheel Steady Rest
    By joe greiner in forum WOODTURNING - GENERAL
    Replies: 21
    Last Post: 30th November 2008, 05:21 PM
  3. Steady time
    By BobL in forum WOODTURNING - GENERAL
    Replies: 4
    Last Post: 26th March 2008, 01:35 PM
  4. who has a steady hand?
    By goat in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 2
    Last Post: 24th January 2007, 08:48 AM
  5. Steady
    By DonN in forum WOODTURNING - GENERAL
    Replies: 1
    Last Post: 28th February 2001, 04:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •