Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 61 to 75 of 118
-
13th April 2011, 09:07 PM #61
Thanks Brian i didnt even think of that, but know that i am it still wouldnt work with the area ive got to weld to, i havent got room on either side but thanks again for the idea.
Proud to be an AUSTRALIAN
Scotty
-
13th April 2011 09:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th April 2011, 10:04 PM #62
Yesterday i cut and fabricated an alternator. Got the shaft glued in and mounted to motor. I also made the pulleys for alternator and water pump.I also cleaned the carbs and blower in rust converter.
Today i got stuck into mounting the alternator and pulleys then cutting a new blower belt and mounting. Next was the steering arm which i cut and soldered ends on and bolted to the steering. Next i remade the distributor cap and drilled because i lost it when i took to work.
Proud to be an AUSTRALIAN
Scotty
-
17th April 2011, 10:01 AM #63
Wow you've been very busy Scotty.
Most excellent.
Top photos of the small details.
Cheers, Crowie
-
17th April 2011, 11:02 AM #64
The progress on this is amazing, such detail and great WIP. All this and not working off a plan is incredible. I am sure this would get heaps of attention at car shows. Keep those pics coming Scotty
Reality is no background music.
Cheers John
-
17th April 2011, 09:11 PM #65
Thanks for the comments Crowie and John,
This afternoon i bent up some brass rod and made the fuel lines from the carbys to the main fuel line. Next i started to make the fuel line mounting brackets after i charged up my cordless drill. LOL. These wont be mounted till after the chassis is painted and the final detail is being done.
Proud to be an AUSTRALIAN
Scotty
-
17th April 2011, 11:39 PM #66
next project
Good to see that you might be inspired to make a truck for your next project, I love your current project of course, that goes without saying. Man I aint got that much patience.
If you give me a size and a rough idea of what you want, I will be happy to look at supplying you with some timber wheels for your truck.
Phil
-
19th April 2011, 08:00 PM #67
Thanks Phil for your comments and for your offer i will let you know when im ready. I have had different ideas going through my head already on how and what i can use to make things with and looking at different pics on style of truck. I was thinking of using the same as the wheels as the rod but i think yours would look way better. I will be building it around the same size as the rod of approx 750mm long.
Cheers
Proud to be an AUSTRALIAN
Scotty
-
27th May 2011, 08:32 PM #68
Just checking up on you!!
G'Day Scotty,
I was thinking last night that I haven't seen any updates from Scotty for a while
and thought I best check up when it was I last saw a post on the Rat Rod.
Wow it's been over a month!
I hope all is well with you Scotty.
Apologies if I'm being too nosey and chasing you up.
Cheers, Crowie
-
28th May 2011, 02:16 PM #69Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Crowie and I must be on the same wavelength!
How's it going Scotty??
-
29th May 2011, 10:51 PM #70
Thanks for your concern Crowie and Artme, Ive been too busy at work starting early and finishing late for the past month so i havent had time to even go into the garage. To top things off i had a fall at work last monday night which could have ended up quite serious or even fatal for me but i manage to hold onto the peice of glass which was 2800x1400 in size when i tripped over a pallet a fell on my back, fighting with it to keep it from hitting the floor and breaking coming straight down on top of me. Luckly i only ended up with a big bruise on the back of my leg and strained muscles in my arms, neck and back.
I did spend some time in garage today cleaning up and doing a few more things on the truck.
And whats been going on here since ive been gone theres toys being produced everywhere which is great to see
Proud to be an AUSTRALIAN
Scotty
-
29th May 2011, 10:58 PM #71
G'Day Scotty,
Sorry to hear of the work mishap, but very happy to hear that you're all good [so to speak].
There have been some great "toy making" posts in the past month, so as you have a little time off to mend, you'll see them for yourself.
Too much work and not enough play isn't any good for anyone.
Get well soon and look after yourself.
Cheers, Crowie
-
30th May 2011, 09:42 PM #72
That could have been real nasty Scotty, you were lucky mate.Pleased to hear you escaped a serious injury.
Reality is no background music.
Cheers John
-
31st May 2011, 08:30 AM #73
Glad you are ok Scotty.
I am overawed at your ingenuity. Keep inspiring us.
Pete
-
31st May 2011, 01:53 PM #74Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Phew Scotty and Phew again!! Bloody lucky I shudder to think what might have been!
-
7th June 2011, 05:11 PM #75
How's it going Scotty.
All mended or still in recovery.
Miss seeing your brilliant handy-work, mate.
Hoping all's well.
Cheers, Crowie
Similar Threads
-
Ford Model T
By nine fingers in forum TOY MAKINGReplies: 35Last Post: 5th January 2011, 09:55 PM -
T Model Ford Fire Truck
By STAR in forum TOY MAKINGReplies: 15Last Post: 29th June 2010, 09:55 AM -
Model T Ford assembly line
By Andy Mac in forum MOTOR VEHICLESReplies: 0Last Post: 23rd June 2010, 02:16 PM -
My first Heirloom toy - A Model ford
By bryon in forum SCALE MODELLINGReplies: 18Last Post: 10th March 2007, 08:35 AM -
Model T Ford Restoration - Timber for Floor and Door Frames
By QldWoodie in forum TIMBERReplies: 15Last Post: 20th November 2005, 08:46 PM