Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0

View Poll Results: HOW SHOULD THE INTERNATIONAL FREIGHT BE APPORTIONED?

Voters
55. You may not vote on this poll
  • BY WEIGHT OF ORDERS

    26 47.27%
  • BY VALUE OF ORDERS

    29 52.73%
Page 1 of 30 12345611 ... LastLast
Results 1 to 15 of 445
  1. #1
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default COLT DRILLS – GROUP BUY expressions of interest

    Evenin’ All

    I’m calling for expressions of interest in a group purchase of Colt Drills, either directly from the manufacturer, or a retailer in the USA.

    For those of you who have never used a Colt product – they are absolutely outstanding. Having read threads on them it seems that many would like to purchase them but are put off buy the usual “buy in Australia and pay nearly double”. The range available here is VERY limited as well.

    PRODUCT RANGE:
    Twinland Brad Points
    5 Star Brad Points (in ½mm increments…ooooh yeahhhhh)
    Long Brad Points
    Extra Long Brad Points
    Pen Drills
    HSS Forstners and extensions
    Carbide Hinge Bits
    Countersinks & Countersink/Drill combos (big range)
    Auger Bits (full range in 230mm, 320mm, 460mm, 600mm lengths)
    Formwork Drills

    PLEASE NOTE: Colt do not make normal Twist Drills.

    My own experience is limited to the 5 Star Brad Points. I use an 8mm in particular and have drilled hundreds of holes in Spotted Gum (hardness 10) with this bit, and it’s still more or less like new. Many of these holes have been 70mm deep, and are done in less than 5 seconds, with three pulls on the lever. Chip ejection is excellent. You don’t even need support on the BACK of the board to get a clean exit.

    There are a number of forumites who have the forstner bits, and the reports are similar to mine.

    At this point I’m only looking for indications of interest. I have been having dialogue with Juergen Miebach, the Managing Director, and am currently waiting for him to come back to me on whether we could purchase direct. Failing that there are a number of retailers in the USA. The only problem with that is that none of them would stock the complete range (which is very extensive). That makes a manufacturer direct purchase more attractive, especially if we can get some red hot prices.

    Website but ah, it’s in German (I know, I know, beats the crap out of me too). That’s why I’ve attached the PDFs that Juergen sent to me.

    I have attached a spreadsheet and PDFs which you are welcome to download. The spreadsheet is locked so that the only cells you enter data into are the “QTY” cells. The password is blank if you really need to make some notes or whatever.

    You will note that the currency converter at the top is as at 3rd March. You can enter a more current one if you wish. I used the currency converter on Google, which won’t be final, but gives a good indication. There is also a “Grand Total” at the top in blue. I have taken the prices from the website.

    STOP PRESS: Err, I had to split the spreadsheet in two so the Grand Total is only on the first sheet. If your into Augers and Formworks then get ya calculator out!

    If you’re interested the best thing to do at this stage is to work out roughly what you want, and then reply back to say “I’m in for about $80 worth” etc. I DON’T NEED OR WANT SPECIFIC DETAILS at this stage. This way I can go back to Juergen and say “we have interest for $900” or whatever (dangling a carrot you see).

    Freight prices will have to be worked out later, and then the forwarding postage within Australia for each member.

    If you are a current user then give them a vote of confidence in this thread (short & sweet is good). If you’re not, then do yourself a big, big favour and have a look at these marvelous products.

    Regards, Brett

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2003
    Location
    Christies Beach
    Age
    59
    Posts
    972

    Default

    Brett,

    Put me down for $390 worth at the moment! (Will increase no doubt!)

    I'll also put my hand up to be the South Australian (Adelaide) distributor if there are enough to warrant it. We have Border Express come to our plant 3 times a week.
    The secret to creativity is knowing how to hide your sources.
    Albert Einstein

  4. #3
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Good lad Tankstand. Have you used them before?

  5. #4
    Join Date
    Dec 2005
    Location
    Emerald, QLD
    Posts
    4,486

    Default

    Put me down for at least $300 worth. Having bought the 3 sizes I use most in Maxicut Forstners and knowing how much better they work, I'll be looking to expand my set . (and ya gotta love that Rotastop system )

    If their brad point drills are even half as good as their Forstners, I'll grab a set of them too. I've wasted a lot of money on brad point sets over the years and I'm yet to find any that cut without a mountain of force behind them.
    .
    Updated 8th of February 2024

  6. #5
    Join Date
    Mar 2006
    Location
    Earth
    Posts
    3,567

    Default

    I would be interested in a mere $200 worth of "Colt 5 Star" Brad-Points.

  7. #6
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Mr Tit, the BPs absolutely storm through spotted gum - 70mm deep hole with an 8mm, 3 pulls less than 5 seconds, no tear out, no breakout, superb chip ejection, no burning, 'uckall effort. Hundreds of holes with same bit (different depths, all spotted gum) still razor sharp. What else do you want??

    FF

  8. #7
    Join Date
    Apr 2007
    Location
    Adelaide Hills, South Australia
    Posts
    4,311

    Default

    Is that as large as their Forstner bits go?
    .
    Stay sharp and stay safe!

    Neil



  9. #8
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Quote Originally Posted by NeilS View Post
    Is that as large as their Forstner bits go?
    .
    55mm in metric and 2 1/4 (57.15mm) imperial

  10. #9
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    3,197

    Default

    Coincidentally, I just bought the last two Colt forstner bits I wanted from Lee Valley (arrived today), but would be interested in the 5 Star Brad Points.

    VERY happy with the Colt forstners !

    Cheers

  11. #10
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    FenceFurniture, I'm in for (uck-guck) $947.

    Sterling job your doing.

    Best Regards, FenceFurniture

  12. #11
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    Chaps: I'm keeping a rough tally in my original sheet. It stands at $1837 so far. I'll send a carrot email to Juergen tonight to let him know how things are progressing.

    Mr Brush: a rough $tally?

    FF

  13. #12
    Join Date
    Jan 2005
    Location
    West Melbourne
    Age
    51
    Posts
    123

    Thumbs up Me too!

    Hi, I'd be in for around $300 worth.

    Bruce T.

    Edit by Groggy: - Since we will be ordering together due to close location I will add another $300 in here. (i.e. $600 total for this post)

  14. #13
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default Ahem! Just to clarify....

    1. There is no commitment to any retailer or Colt direct

    2. We'll buy at the best prices for the greater good. That is to say, some places are cheaper on one item and dearer on another.

    3. I'd be mightily surprised if we can't get a spanking good deal from Colt, and we all know that there's nothing like a good German spanking.

    So, depending on how it all goes, we may not even have to sound out any of the retailers (i.e. if Juergen comes up with the goods, then why bother).

    Bear in mind that the manufacturer should have just about everything in stock, AND in the required numbers.

    Cheers, FF

  15. #14
    Join Date
    May 2007
    Location
    North of the coathanger, Sydney
    Age
    68
    Posts
    9,417

    Default

    Damn

    I just got some (this week, like Tuesday, arrrgggghhhhh)

    but I'm sure I need a few more
    I'll work it out tomorrow


    bugger bugger bugger
    regards
    Nick
    veni, vidi,
    tornavi
    Without wood it's just ...

  16. #15
    Join Date
    Nov 2008
    Location
    Brisbane
    Posts
    696

    Default

    Hope this goes ahead, I'm in for about $300


Page 1 of 30 12345611 ... LastLast

Similar Threads

  1. HEADS UP COLT DRILLS ORDER 2 closing very soon....
    By FenceFurniture in forum ANNOUNCEMENTS
    Replies: 1
    Last Post: 7th March 2012, 09:32 AM
  2. Colt Drills purchase No2.
    By FenceFurniture in forum ANNOUNCEMENTS
    Replies: 0
    Last Post: 12th December 2011, 07:53 PM
  3. POLL on COLT DRILLS SETS
    By FenceFurniture in forum ANNOUNCEMENTS
    Replies: 5
    Last Post: 14th May 2011, 08:38 AM
  4. HEADS UP Colt drills - last orders please
    By FenceFurniture in forum ANNOUNCEMENTS
    Replies: 0
    Last Post: 11th May 2011, 05:18 PM
  5. Pen Kits, Cases, Craft Pieces – GROUP BUY expressions of interest
    By benupton in forum WOODTURNING - PEN TURNING
    Replies: 17
    Last Post: 3rd May 2011, 09:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •