Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
20th March 2011, 11:54 AM #1Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 402
Taurus Cordless 24volt Drill - Aldi
I would like to purchase this drill in the latest Aldi Catalog 24 March 2011. I would like the comments and opinions of present and past owners of this drill regarding the quality and longevity versus use that was experienced.
Please do not comment if you do not have experienced this drill OR try and suggest other well known brands as substitutes. Thank you for your response.
-
20th March 2011 11:54 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th March 2011, 10:07 PM #2
The specs tell the story.
Cordless Drill 24V
$ 59 *
13mm keyless chuck
No load working time: 30-35mins This will mean that you will be able to drive about 2 screws
Impact speed: 0-8000min for how long?
Left/right rotations
21 + 1 torque settings
Inside impact function
Save your money. even the cheaper of the more known brands give you a decent working time.
RobertCheck my facebook:rhbtimber
-
23rd March 2011, 11:11 PM #3GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,271
I bought one six hours ago, after charging up the battery I have just returned from the garage after drilling a million holes in all sorts of timber with 6mm and 10mm wood bits.
The things got grunt, as it should after my 12V cordless has finally died after a zillion charges. The 24V seems to be effortless.
I recently used a makita cordless drill to drill through my steel tray on the ute. It wasn't my drill, I was round a mates place and we did a bit of fiddling and I watched him drill through 12mm steel carefully and effortlessly. I then attacked the ute tray, like warm butter with a 12mm drill through 5mm steel easy peasy.
I have a feeling that this Aldi drill will be able to drill like the makita, but not in the same way. Think Mercedes and Daiwoo in motor vehicle land
Basically the drill is very functional, it has a nice little row of LED's that throw a nice beam on the drill bit tip, I didn't expect this to be as good as it was. I turned the garage lights off and had a go, worked a treat, could see perfectly.
There is a spirit bubble for drilling into walls on the top, don't know how true it is, but it's got to be better than guessing and the holes I did drill with timber in the vice, appeared to be close to 90º
There is a press to see LCD battery level indicator.
The battery is a 24V Ni=Cd which I think is what we call a Nicad battery.
The hand book mentions that it takes about 5 charge and discharge cycles before it achieves full performance.
The chuck can handle drill bits from 2mm through to 13mm. I tried a 2mm drill bit and it holds it.
There are two speeds which are changed by a sliding thingy on the top of the drill. Speeds are 0~350rpm and 0~1100rpm.
The trigger can be pulled in very slowly and as you pull in, the speed increases very slowly. Very controllable.
In the blow moulded case there are a small array of phillips and the other like phillips bits, two sizes of each, plus two slot screw bits and the holder that actually goes in your chuck to hold the bits.
There are also about 5 twist drills, which if they are like a set I bought from Aldi for about $4.00 aren't worth $4.00. Probably good for soft wood and such.
If you require a drill that will have non commercial work, that is sporadic handyman work like I do, then this should be good. If you are after tradesman quality, not in a million years.
I'm very happy.
Did I say it's heavy, well it is!
Mick.
Ps Aldi quite often have Thursday specials out late on Wednesday. I was in my local Aldi about 20 minutes before closing time, they had just been wheeled out.
-
24th March 2011, 09:43 AM #4Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 402
Thanks for your assessment - Optimark.
Sounds like I will do what I want for the small outlay and amount of work I envisage.
Ned Black.
-
24th March 2011, 09:59 AM #5
I got one in the sale last year, still going although I feel the battery isn't holding the charge as well as it did. I might get another one just for the spare battery.
Michael
Wood Butcher
-
26th March 2011, 08:21 PM #6GOLD MEMBER
- Join Date
- Oct 2004
- Location
- Melbourne, Australia.
- Posts
- 1,271
So Ned, did you get one, or not?
Grommett, interesting about your battery starting to feel as though it isn't holding it's charge as well as it once did. Battery life is supposed to be around 3 years for most battery powered stuff, from what I've been told.
My 12V (no name cheap as chips) drill is now 8 years old and the battery pack can now only hold a charge long enough for one or two 6mm holes in softwood. It's a fantastic drill now for doing tiny screws in computers, won't strip them as it has no grunt.
Mick.
-
26th March 2011, 09:51 PM #7
[QUOTE=Optimark;1295528]
Grommett, interesting about your battery starting to feel as though it isn't holding it's charge as well as it once did. Battery life is supposed to be around 3 years for most battery powered stuff, from what I've been told.
I find I need to charge it up if its not been used for a few days. Once charged it works OK, or as well as I expect. It no longer has the grunt to put in 75mm tec screws/roofing screws, it did a year ago. Now its fine for faceplate screws, brackets etc. General shed stuff. Runs the pen mill just fine.
I got the new one. Feels OK, I like the battery state display.Michael
Wood Butcher
-
27th March 2011, 11:14 AM #8Ring Master
- Join Date
- May 2006
- Location
- Lake Macquarie NSW Australia
- Posts
- 402
Changed my mind and bought a Bosch PSR-14-4-2 Electronic Cordless Drill
with 2 Batteries - $129.00
Reason for change of mind was because I stumbled acroos an old birthday Bunnings Gift Card ($50.00) given to me 3 years ago and carefully put away for a rainy day.
So I only paid the difference $79.00.
This particular drill battery has a one hour charge that reverts to trickle charge when full.
Have not put it to use as yet but will report back in the future.
Thanks to all who have responded and hope that we all get the results that we require.
Ned Black
Similar Threads
-
Aldi/Taurus Router Table and Router
By damienb in forum PRODUCT REVIEWSReplies: 5Last Post: 10th September 2010, 10:53 AM -
Aldi 60$ drill press
By zcream in forum METALWORK FORUMReplies: 4Last Post: 2nd September 2010, 12:27 PM -
SDS and Aldi Rotary Hammer Drill
By Sawmaster in forum HAND TOOLS - POWEREDReplies: 2Last Post: 13th August 2010, 09:47 PM -
Aldi Taurus drills
By artme in forum HAND TOOLS - POWEREDReplies: 1Last Post: 31st May 2010, 10:59 AM -
Aldi's Taurus Cordless Impact Drill & Screwdriver
By Ricardito in forum PRODUCT REVIEWSReplies: 1Last Post: 20th August 2009, 01:23 PM