Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 151 to 165 of 313
Thread: GIS Build in New Jersey, USA
-
5th September 2011, 01:01 PM #151
Still 2D...
I'm doing lots of stuff besides going 3D. Today one hull side got inwale spacers stuck to it. I also did a lot of sanding on my rudder. And some time was spent contemplating Black Walnut.
Some explanation for my decision(s) is offered on my GIS Chronicles blog.Dave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
5th September 2011 01:01 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th September 2011, 09:22 AM #152
Look what I found on Craigslist:
Made by a boater for his homebuilt 14' wooden rowboat that weighs about 200lbs fully loaded. It's not easy finding a lightweight trailer meant for light boats and long enough for a Goat. Total length of trailer is 15' so the goat should fit beautifully. It's a little rusty but for $150 it can't be beat!
Sent from my iPhone using TapatalkDave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
11th September 2011, 10:02 AM #153
Just catching up on your build. Nice progress. Those springs on the trailer look perfect for a light weight hull, Should smooth out the harsh roads nicely. Good pickup.
-
11th September 2011, 10:43 AM #154
Lucky dog!
-
11th September 2011, 12:43 PM #155Senior Member
- Join Date
- Jul 2008
- Location
- Florida USA
- Posts
- 337
Nice find. That's an unusual trailing arm trailer suspension. Should ride smooth.
Simon
My building and messing about blog:
http://planingaround.blogspot.com/
The folks I sail with:
West Coast Trailer Sailing Squadron
-
11th September 2011, 01:47 PM #156
Pretty cool, huh? I didn't angle the camera properly to show the shock absorbers but they are outboard of the springs on the aft face of the frame member.
The design is not unlike a Holsclaw, if you're familiar with that. I wasn't--until I came across a very informative thread on WBF started by none other than Thorne. He was seeking trailer plans/designs and referred to the virtues of the defunct Holsclaw trailer and its trailing arm/coil spring set-up. What serendipity it was to see this trailer for sale after reading about how hard it was to find or recreate a Holsclaw.
I hope to address some of the weaker welds and rust spots. The coupler could use a refit, but it works. I've always wanted a reason to learn to weld; I may have created a monster (meaning me with yet another new obsession...).Dave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
11th September 2011, 04:00 PM #157Senior Member
- Join Date
- Jul 2008
- Location
- Florida USA
- Posts
- 337
I was wondering if the coil springs would bounce a lot but with shocks you are set. I have a Mig welder. Highly recommend one. It's very rewarding to stick bits of metal together. You know when after chainsawing something you keep walking around the yard, blipping the throttle looking for other stuff to cut? Welding is like that too.
Simon
My building and messing about blog:
http://planingaround.blogspot.com/
The folks I sail with:
West Coast Trailer Sailing Squadron
-
12th September 2011, 01:35 AM #158
Simon, that's true! My son bought himself a MIG welder last year. For months, all we heard was "you have anything you need fixed?" I think he'd weld the cat if he could!
-
12th September 2011, 07:59 PM #159Senior Member
- Join Date
- Dec 2010
- Location
- "Old" Hampshire, UK
- Posts
- 105
-
30th September 2011, 12:28 PM #160
I am a Goat building slacker.
Once the school year began, our household routine has had a major impact on my construction schedule. Tomorrow I head off on a Boy Scout camping trip with my son, which will make three consecutive weekends I've been out camping.
I've spent a little time playing with wood (including a satisfying chainsaw session!). Look for this handle on my tiller in the future:
Sent from my iPhone using TapatalkDave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
30th September 2011, 01:06 PM #161Senior Member
- Join Date
- Jul 2008
- Location
- Florida USA
- Posts
- 337
Wow, you made that with a chainsaw? Awesome
You're not the only Goat building slacker, forum's been real quiet lately.Simon
My building and messing about blog:
http://planingaround.blogspot.com/
The folks I sail with:
West Coast Trailer Sailing Squadron
-
30th September 2011, 02:09 PM #162
That's how it goes. It took me 3+ years to finish mine because of work, kids, family, etc. Especially kids. I hope you get yours finished sooner.
-
6th April 2012, 11:33 AM #163
As the Black Black emerges from his winter lair stiff and groggy, so too does the New Jersey GIS builder.
During my hibernation, I took care of some little details that would have to get done some time or another. I did some work on my trailer and installed a hitch on my car (my wife made it clear that her minivan that does have a hitch will NOT be the prime mover for my boat. In her words, "if YOU own a boat, YOU should be able to tow it with YOUR car.") I also coated my spars with epoxy and started working out the hardware for bending the sail. My mast got some coating, but not the complete three coats. Today I went out and sanded it lightly in preparation for more epoxy. I also did some shopping (an all-weather activity thanks to the internet) and picked up some goodies including a dry suit, a collapsible bailing bucket and a sea anchor (not sure if I'm gonna use it but it was pretty inexpensive).
I played with walnut some more:
IMG_0518 by davlafont, on Flickr
IMG_1791 by davlafont, on Flickr
IMG_1790 by davlafont, on Flickr
IMG_1867 by davlafont, on Flickr
And I punched holes on two bulkheads:
IMG_0556 by davlafont, on Flickr
IMG_0557 by davlafont, on Flickr
IMG_1865 by davlafont, on Flickr
IMG_1866 by davlafont, on Flickr
Finally, I drilled and pre-installed a cheek block on the mast for the halyard:
IMG_1858 by davlafont, on Flickr
IMG_1856 by davlafont, on FlickrDave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
6th April 2012, 12:12 PM #164
SWEET! Looks like lots of progress. And those cleats are going to look GREAT.
I really wish I had precoated my bulkheads like you did. You're going to have a much easier time prepping the interior after it all goes together. Smart move.
-
6th April 2012, 11:49 PM #165
Similar Threads
-
Some ones got to build it!
By scottyk in forum BOAT BUILDING / REPAIRINGReplies: 69Last Post: 25th June 2009, 02:12 AM -
Trailer - to build or not to build
By motegi in forum TRAILERS & OTHER FABRICATED STUFFReplies: 17Last Post: 6th May 2009, 03:07 PM -
Need jersey frame plan
By cygnus in forum DESIGNS & PLANS FOR PROJECTSReplies: 0Last Post: 1st December 2008, 03:21 AM -
New Build
By xray in forum MUSICAL INSTRUMENTSReplies: 2Last Post: 27th August 2008, 09:52 PM -
first build
By joem in forum MUSICAL INSTRUMENTSReplies: 2Last Post: 14th October 2007, 02:53 PM