Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 46 to 60 of 111
-
12th July 2011, 08:57 PM #46
-
12th July 2011 08:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th July 2011, 10:31 PM #47
Close but no cigar.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
12th July 2011, 10:44 PM #48
-
30th July 2011, 05:08 PM #49Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I've been to busy reorganising my workshop, and it has been to cold to work outside, to do much on the woodstore.
However I've been busy collecting doors, framing materials and melamine boards whilst the council had it's hard rubbish collection.
Here are the photos showing most of the stash I collected fort this project. The melamine boards are in the garage and the rest is neatly stacked in the woodstore. I'll be glad when the garage is empty of all the stuff.
Enjoy.
Peter.
-
30th July 2011, 05:21 PM #50Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Workshop reorganisation.
Most of you will know that my workshop is under my house and due to the various stages of expansions has a number of interconnected but distinct areas.
Over the years my interests have changed and a number of large machines, which were seldom used, was taking up valuable space, so this reorganisation has banished the jointer, thicknesser and other tools to another shed. They will, in due course, be setup and still available when needed.
This has allowed my turning room to be organised and also the other back room will have a dedicated sharpening station as well as the drill press, band saw and SCMS.
Photos 1 -3 show the revamped turning room from left to right, photos 4 & 5 show the other back room and finally the remaining photos show the main workshop from left to right again around the room.
I apologize that the main workshop is not as clean as the rest but I've only just managed to clear the main workbench.
Peter.
-
30th July 2011, 05:48 PM #51
In another life Peter was surgeon or a sterile room worker Peter its one of the first sheds I saw when I joined this forum and I am still impressed
Ray
-
30th July 2011, 06:26 PM #52
Looks like a work of utter contentment, onya Sturdee!
-
30th July 2011, 08:26 PM #53Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Thanks guys for your kind comments. I do like using my workshop, especially the turning area. Did some turning yesterday and today, first time since the revamp and it was great. Everything to hand and surprisingly plenty of room.
Although the winter hasn't been kind, I haven't had to use the workshop heaters, as it is kind of insulated with the backrooms having two layers of 12 mm foam interlocking floor tiles and an anti fatigue mat in front of the lathe.
Tomorrow some work on the sharpening station, need to mount the on/off switch of the wet grinder to the front of the cabinet and mount a Tormek BGM unit for the dry grinder.
BTW the cabinet was another scrounged unit, formerly a bathroom sink cabinet.
Peter.
-
30th July 2011, 08:27 PM #54Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
30th July 2011, 11:28 PM #55
Knew it...that accounts for all the glass jars and little jigger-me-bob placcy hurdy gurdies on the wall for putting many little beans in!!!!!
-
31st July 2011, 10:14 AM #56
yeah you can tell you are very organized.
-
31st July 2011, 01:19 PM #57Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
I used to have glass jars but when I dropped them they broke, not very good in a workshop. So I use the bottom half of the 2 litre apple juice containers, amazing how many you get with only drinking a small glass at breakfast.
They are a good size, easy to see what they contain, cheap and don't break when you drop them.
Peter.
-
1st August 2011, 12:47 AM #58
-
9th August 2011, 05:47 PM #59Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Converting the bookcase for storage.
Started on converting the bookcase in Storage area 1 to proper solid shelving to take smaller pieces.
This bookcase, together with 3 other ones, I bought when I was in my 20's and have done sterling service, first as ordinary bookcase then converted into built in bar display shelves and now into it's ultimate use in the timber store.
Made from pine with plywood back it has stood the test of time and has paid for itself many times over.
I decided to strengthen the shelves by inserting a solid back and sides, then adding extra sides and finally doubling the shelves by nailing another to it. Maybe over engineering but as I'm using up old timber and recycled chipboard the extra materials was free.
Also using nailguns means that the labour is not too hard.
Picture 1 is the old bookcase before starting today.
Picture 2 shows the back and sides for supporting the first shelf.
Photo 3 shows it nailed in position, together with the extra side supports and shelf nailed onto it and photo 4 shows a close up.
Peter.
-
9th August 2011, 05:54 PM #60Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
As the shelf for the next one was removed the photos are a bit clearer.
Photo 1 shows the back and side nailed into the bookcase.
Photo 2 shows the extra sides.
Photo 3 is the first layer of the shelf nailed in. and photo 4 shows the second layer nailed to the first.
Finally photo 5 shows all the shelves done.
This part is now ready for use. The width of the finished shelves are 800 * 230mm with varying heights and will be good to store smaller pieces.
Next the deeper shelves next to it.
Peter.
Similar Threads
-
Sturdee's Wood Store.
By Sturdee in forum WOODWORK PICSReplies: 9Last Post: 12th September 2004, 08:47 AM -
Sturdee's Finishing Shed.
By Sturdee in forum WOODWORK PICSReplies: 40Last Post: 12th September 2004, 08:31 AM