Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: HDPE supplier
-
15th January 2005, 06:29 PM #1
HDPE supplier
I've seen people mentioning HDPE as a good material to use for fences, drawer slides etc.
Can anyone point me to a supplier in Syndey - Googling HDPE I can only find industrial suppliers.
Or does everyone just use those white chopping boards and cut them up?
Tony
-
15th January 2005 06:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th January 2005, 07:06 PM #2
Yup, $2 shops are the way to go. You can get bigger chopping boards from catering suppliers but they cost a bit more.
Photo Gallery
-
15th January 2005, 09:42 PM #3
Gday Tony, can't help with a local supplier, but from what I gather the chopping board material is PE, but different than the HDPE (lower density??).
Part of the prob with the chopping boards for fence faces is that they usually seem to be textured rather than smooth, and more often than not seem to be warped to some degree. This isn't a drama in the chopping board mode, but not ideal if you're after a dead flat/straight router table fence face.
Cheers..............Sean, warped to some degree
The beatings will continue until morale improves.
-
17th January 2005, 02:25 PM #4
UHMW slides available
Originally Posted by tony2096
Regards
The Woodpecker
-
17th January 2005, 02:45 PM #5Originally Posted by scooter
On the other hand, Laminex is probably just as good for the facing of a fence.
The cutting board material excels as runners for micro-adjustable fences on morticing and tenoning jigs, since it is easily planed to provide a satisfactory fit in a routed groove.
Rocker
-
17th January 2005, 03:04 PM #6
Thanks for the responses.
I found a plastics company in Brookvale who sold me an off-cut: $66 for 300x1500mm polyethylene
I'll also try the chopping boards (don't have a thicknesser, Rocker) and see how I go.
Tony
-
17th January 2005, 05:23 PM #7
You can easily hand-plane it as well.
Rocker
-
19th January 2005, 11:42 PM #8
Wash your mouth out Rocker :eek:
Cheers.......Sean, high density, low molecular weight
The beatings will continue until morale improves.
-
20th January 2005, 03:08 AM #9GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Cut to Size Plastics will sell it to you, but I'd do a ring around first & get a lower price - I think 'Dotmar' quoted a lot cheaper to start with, but when told what had been quoted, the price went down to a bit less than the opposition price ;-) Your mileage may vary.....
Delivery is optional & costs around $25, but there is a maximum length of 1.5metres uncut - they will cut longer bits down for you.