Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Torque Work Centre
-
3rd March 2012, 06:25 PM #1New Member
- Join Date
- Feb 2012
- Location
- North shore
- Posts
- 6
Torque Work Centre
Hey All,
the main point is should I consider buying a TWC, as I don't have all the big machinery? As an Ex Carpenter I have amassed a lot of portable power tools so was thinking this would give me the versatility of a lot of machinery without have used up valuable space I don't have. At $4500 i know its a big outlay of cash but if I brought all the machinery it replaces I figured it would even out? I have seen Stue's shed, Lazy Larry and other videos on this product but want a less sales pitch and more users experience and advice.
Thanks
Phill
-
3rd March 2012 06:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th March 2012, 01:22 PM #2Deceased
- Join Date
- Jun 2008
- Location
- ocean grove
- Posts
- 120
Three questions seem to arise from this post:
1* Exactly what machines does the TWC replace?
2* How inconvenient would it be to keep changing the TWC from one function (e.g. sawing) to another (e.g. drilling)?
3* How many machines of reasonable quality could you buy before reaching the cost of a TWC?
I suspect the answers to those questions have meant that not many members of these forums have bought a TWC, and that, therefore, the feedback you are looking for might be very limited.
-
6th March 2012, 06:38 PM #3GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 1,042
I bought mine a few years back after watching it demonstrated at wood show. I have since done a few demo's at shows since so maybe a bit baised.
Its certainly my goto tool
I dont feel it replaces anything in my shed rather it enhances and makes jobs easier.
But it could replace my router table,my tablesaw, my drill press.(looking back on my last use of drill press I think it might have actually replaced it)
So far with the TWC I have made my own mounts for the biscuit joiner,chainsaw,and horizontal mount for drilling plus making my own extension table.
The top is different from the factory recommendation its 30mm MDF into which I have drilled a pattern of dog holes to fit the walko/festool clamp system and also tracks fitted 5mm below surface for sliding clamps.
The setup and changeover of tools is quick and easy and I have found that the better your tools the better the results.
Not having a panelsaw I had always found that cutting up full panels a real pain but since having the TWC it really has been an easy exercise.
Its nice being able to put the panel down on the bench mark it up clamp it down then cut accurately and safely.
I can then rout or drill the cut pieces.
The best thing I like about it is the work piece is clamped down and the sharp pointy bitey things are kept well away from my fingers.
Its also nice to clamp down large slices of burls and rout them flat then sand them to a 600grit finish,same with large endgrain chopping boards.
Also Yass Engineering are very good in that any enhancements they come up with are retro fittable and also they are very interested in feedback or improvements you as a user come up with.
Like I said I might just be a bit biased about the TWC I like it a lot.Some people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
6th March 2012, 09:31 PM #4
Or for $2-3k you could build a CNC router and let it do everything bar the final sanding....
-
7th March 2012, 12:14 PM #5Senior Member
- Join Date
- Sep 2011
- Location
- Northern Beaches, Sydney
- Age
- 68
- Posts
- 329
It will also depend on what type of woodworking jobs do you want to do.
Your portable hand tools in this TWC may be OK for hobbyist work to knock up a few shelves and cupboards etc ( I know these machines are better than this but I just want to raise the point ) but for a production run of raised panel doors etc for a kitchen or five, it may frustrate you.
I've briefly used a couple of combo machines in the past and they were good but the constant setup and changing over would have driven me nuts.
Stewie
Similar Threads
-
Torque work centre feedback......
By Ken Darvell in forum THE WORK BENCHReplies: 7Last Post: 21st November 2011, 11:12 PM -
Torque Work Centre
By fubar in forum HAND TOOLS - POWEREDReplies: 0Last Post: 18th September 2010, 03:04 PM -
Torque work centre
By Logman in forum ROUTING FORUMReplies: 7Last Post: 27th July 2010, 07:11 PM -
Torque Work Centres now online...
By Gwhat in forum PROFESSIONAL WOODWORKERS SUPPLIESReplies: 0Last Post: 21st March 2010, 07:54 PM -
Torque work centre for work space
By carrom in forum WOODWORK - GENERALReplies: 0Last Post: 30th December 2009, 05:29 PM