Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: HSC Build
-
7th March 2012, 08:59 AM #1New Member
- Join Date
- Apr 2009
- Location
- Kalaru
- Posts
- 1
HSC Build
hi all
My son (and also student - Yes i am his wood teacher ) is making an acoustic for his HSC project. We both hope to sek some advice as we go along - so its nice to b here
Does anyone have any plans or hints for a homemade bending iron? We are doing the majority of bend with a 'fox jig' but the cutaway will need an iron.
Any help would be great.
cheers
Scott
-
7th March 2012 08:59 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th March 2012, 08:59 PM #2Senior Member
- Join Date
- Feb 2011
- Location
- Melbourne
- Age
- 68
- Posts
- 138
Hi Scott,
There are plenty of bending iron plans on the net, chances are you'll need to refine the bend on the sides after bending in the fox jig anyway. I built mine from a piece of pipe (Bunnings), a bit of 3/4" ply and an el-cheapo heatgun from Supercheap. I included a heat sensor and controller which I also use in my fox jig but you can get away without it. You can see in the pic that I had to add a heat deflector in front of the hot air gun with a bit of sheet ally to prevent the plastic front on the gun from melting. I tried a butane torch as the heat source first but never felt comfortable with the naked flame in the shop so switched to the heat gun method.
I always find building the jigs is half the fun!!
Os
Similar Threads
-
help me build a basic flat build bed trailer for my kayaks
By gros21 in forum TRAILERS & OTHER FABRICATED STUFFReplies: 7Last Post: 13th October 2011, 08:47 AM -
New build
By Barbarian_Child in forum CNC MachinesReplies: 37Last Post: 17th June 2011, 02:46 PM -
My First Amp Build
By dayvo in forum MUSICAL INSTRUMENTSReplies: 17Last Post: 2nd October 2009, 10:51 AM -
Trailer - to build or not to build
By motegi in forum TRAILERS & OTHER FABRICATED STUFFReplies: 17Last Post: 6th May 2009, 03:07 PM