Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Timber for frames etc
-
15th February 2005, 12:57 AM #1
Timber for frames etc
My first project is the Hartley Husky 10'6"
If I can still glue, screw and nail it together then maybe a 20'+ will be next.
I have hoop pine ply already but looking for suggestions for suitable timber for the frames etc. Your thoughts appreciated - (south of Adelaide)
-
15th February 2005 12:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th February 2005, 09:53 AM #2
Woodcroft. My dear boy, I am at Happy Valley. I have two boats under construction in my garage as I type ... well, not much constructing is happening while I'm typing but you get what I mean ... don't you?
Seriously mate. Drop me an email
[email protected]
Cheers
Richard
-
16th February 2005, 12:48 PM #3
Timber for frames etc
Richard,
Thanks for the contact, have sent email as suggested
Glenn
-
21st February 2005, 10:34 PM #4
Timber for frames etc
I have bitten the bullet for the frames and used Tamanian Oak.
Next is to decide on what to use for the stringers etc.
The stock is built and the frames cut out.
Originally Posted by Aberdeen
-
30th March 2005, 01:49 PM #5Senior Member
- Join Date
- May 2004
- Location
- Victoria
- Age
- 66
- Posts
- 242
For the frames i would use clear origon. Good second hand stuff. Yellow stringey bark even. If you use Tas oak you will find it will be very hard to use for one. And once the moisture gets to it will start to spilt or at the very least cracks. Even good grade Meranti although whats around these days is very ordinary. Good clear second hand origon is easy to get.
Sinjin
-
14th April 2005, 09:27 PM #6
poisonally Id just go with some Jarrah meself ... but hey thats just me yous fellas go for whatever rocks yer boat!
Hows it goin Richard? Long time no word either way eh mate... life and time eh!Believe me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
-
15th April 2005, 09:08 PM #7
Fellas,
For a little boat, keep it light! Oregon or meranti for the keel and chines, WRC for the frames and stringers is plenty strong enough. If you use jarrah or tassie oak you'll need a forklift to put it in the water.
Cheers
Graeme
-
16th April 2005, 12:56 AM #8
For those of you not in the know, young Aberdeen's Husky is not only coming along at an obscene rate of knots, the bugger's doing a good job as well. The man is an inspiration ... or a disgrace. I haven't worked out which yet. Whatever, it's going to be a gorgeous little boat.
Cheers
Richard