Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Shelving v cupboards
-
6th May 2012, 04:55 PM #1Member
- Join Date
- Oct 2009
- Location
- Nsw
- Posts
- 87
Shelving v cupboards
Man land needs some storage space. I have 1/2 doz. large Coles type strip shelves. However they seem to gather a LOT of dust. So I am considering making (in a fore mentioned manland) some cupboards that are 2.4m high to house things like my electric hand tool, bicycle parts, light globes and such.
Anyone have an opinion on shelving v cupboard thing? Any advice from the experienced is appreciated!
-
6th May 2012 04:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th May 2012, 06:04 PM #2
I definitely prefer cupboards/drawers for tools and other bits 'n bobs storage - if only to help keep the majority of dust out.
I like timber boards and blanks to be on shelves for quickly being able to see what I have and where it is.
-
6th May 2012, 08:47 PM #3Member
- Join Date
- Oct 2009
- Location
- Nsw
- Posts
- 87
-
6th May 2012, 09:35 PM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Cupboards for tools, shelves and racks for materials.
-
6th May 2012, 10:16 PM #5
-
6th May 2012, 10:45 PM #6
I originally used shelving and now one cupboard.
As I started with the shelving I also incorporated plastic tubs to keep things from getting dusty. I labelled the tubs on what is inside with masking tape thus allowing me to know exactly what is where.
-
6th May 2012, 10:51 PM #7
I thinking of going to wire shelves. dust gets in everywhere and at least a half inch square chook wire shelf lets it all drop to the bottom and its stiff enough to use as a shelf for bigger items.
-
7th May 2012, 09:43 PM #8
I have a lot of open shelves but now looking at cupboards as my shelves are all fully coated in dust. I will have some shelves with the next fit out but will have the majority of draws & cupboards
regards Michaelenjoy life we are only here a short time not a long time
-
8th May 2012, 12:05 PM #9.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,793
Using wire shelves doesn't stop the dust getting on the stuff on the shelves. This is where a high capacity DC helps grab dust at source and, unlike most woodworkers I know, leaving the DC running for some time after the last dust making activity to clear out the escaped dust helps reduce dust on shelves and tools.
BTW did you see these?
-
8th May 2012, 09:59 PM #10
For me it is a mix
Old kitchen draws under the drill for all drill and mill related bits and pieces, keep the chips out but still handy
A small shelf about 200 mm high at the back of wall benches help keep some of your stuff off the work surface
Shelving under a bench keep pretty clean, good for stock materials stuff you do not need to often. Set it back a little so there is room for knees and feet.
I inherited a small room in my shed witch I line with shelving and I use for all hand tool and small supplies in contains just like Christos. I bought a box of take away contained and there last a long time holding stuff when sitting on a shelf
My $0.02 worth
Russellvapourforge.com
-
8th May 2012, 10:45 PM #11GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Cupboards are far less dusty, they also help insulate the walls. I prefer above bench cupboards and below bench height drawers. You will still need some shelving for long stuff.
Similar Threads
-
Cupboards for Pop-Up Van need ideas
By les88 in forum WOODWORK - GENERALReplies: 1Last Post: 25th February 2012, 05:38 PM -
Shelving
By Corunetes in forum WOODWORK - GENERALReplies: 19Last Post: 28th May 2009, 11:45 PM -
Shed Cupboards
By Grunt in forum WOODWORK - GENERALReplies: 8Last Post: 1st November 2006, 08:24 PM -
shelving
By readnik in forum WOODWORK - GENERALReplies: 6Last Post: 24th December 2005, 05:16 PM